Mid Century Mod Inspired - Cute Bedside Table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Requires the 3D prints, One 1x6x6' Board, One 1.25in x 6' dowel & a pack of #6 1/2" screws and boom = table
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 571
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This project requires a total of 12 prints. 4 top brackets, 4 bottom brackets, and 4 feets.
You will need the 3d printed parts, One 1x6x6' Board, One 1.25in x 6' dowel & a pack of #6 1/2" screws.
The 6 foot board is to be cut into a total of 6 pieces. 2: "sides" are to be 11in long and 4: “horizontal faces” are to be 12.5 in long.
The dowel is to be cut into 4 equal sections. Approximately 18 inches each
The project uses 20 #6 ½ in screws.
Time lapse: https://youtube.com/shorts/LvmXRotX4WA?feature=share