1 / 5
Mid Century Mod Inspired - Cute Bedside Table
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Requires the 3D prints, One 1x6x6' Board, One 1.25in x 6' dowel & a pack of #6 1/2" screws and boom = table
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 54
- Makes
- 0
- Views
- 571
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This project requires a total of 12 prints. 4 top brackets, 4 bottom brackets, and 4 feets.
You will need the 3d printed parts, One 1x6x6' Board, One 1.25in x 6' dowel & a pack of #6 1/2" screws.
The 6 foot board is to be cut into a total of 6 pieces. 2: "sides" are to be 11in long and 4: “horizontal faces” are to be 12.5 in long.
The dowel is to be cut into 4 equal sections. Approximately 18 inches each
The project uses 20 #6 ½ in screws.
Time lapse: https://youtube.com/shorts/LvmXRotX4WA?feature=share