Allen Key Holder 1.5-10 mm with Engraved Sizes - Wall Mount, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for 9 hex keys (1.5-10 mm) with engraved sizes, wall mountable, prints flat.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Allen key holder for 9 sizes: 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 8 / 10 mm. Sizes are engraved (0.6 mm deep, 7 mm text), keys stand upright and are easy to find. Block 136x24x28 mm with a 5 mm wall tab and 2 countersunk screw holes. Hex holes are key size +0.3 mm, 21 mm deep. Prints flat, no supports. Print: PLA, 0.2 mm, 3 walls, 15% infill, about 3-5 h. Honest note: AI-assisted design (CAD script), not physically test-printed yet. Hole clearance may need +-0.1 mm. Deutsch: Inbusschluessel-Halter mit eingravierten Groessen, wandmontierbar, ohne Support.