1 / 5
002 - Ivysaur Multicolor Figurine — zdjęcie 1
1 / 5

002 - Ivysaur Multicolor Figurine

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Multicolor project for Ivysaur (フシギソウ, Fushigisou, Herbizarre, Bisaknosp) figurine.

Ocena
0 / 5
Polubienia
10
Pobrania
20
Wydruki
0
Wyświetlenia
95
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial
General Information

The Bulbasaur evolution line is my favorite and Ivysaur is my favorite Pokemon.  I was having trouble finding a figurine that is both easy to print and suitable for multicolor printing.  I found a great model by MF3Dtisk on Makerworld, but would have required 8-color printing to get the color scheme I wanted.  Since my printer is only capable of 4-color printing, I decided to remix the model to suit my needs.  The changes I made are:

  1. Drastically simplify the model's geometry;

  2. Split the leaves and bulb from the body;

  3. Simplified internal geometry of the bulb to reduce print time.

Filaments Used

For this print I used the following PLA filaments listed below (also see attached PDF; all links are non-affiliate).  I tired my best to match the RGB of this frame from the anime, while using what I had in stock.

Source 
https://img4.wikia.nocookie.net/__cb20140612023052/pokemon/images/9/90/Jimmy_Ivysaur.png

  • Body

    • Inland Matte PLA Light Blue

    • Inland Matte PLA Denim

    • Sunlu Basic PLA Magenta

    • FlashForge HS PLA White

  • Leaves & Bulb

    • Sunlu Basic PLA Grass Green

    • FlashForge HS PLA Light Brown

    • Sunlu Basic PLA Magenta

    • Sunlu Basic PLA Sakura Pink

Special Note

To match the bulb color as closely as possible, I interlaced (i.e., mixed) the Sakura Pink and Magenta to create a composite pink (see below).

Print Settings

I printed the model at 0.10 mm, using a 0.4 mm nozzle, with the following settings changed.

Quality

Seam Position:

Aligned Back

Support

Support/raft base:

[color other than what it is interfacing with]

Support/raft interface:

[color other than what it is interfacing with]

Multimaterial/Prime tower

Width:

20 mm

Prime Volume:

20 mm³

Assembly & Finishing

Simply align the leaves & bulb to the body and affix with glue; I used cyanoacrylate.
Fill in the pupil with a sharpie or paint.

Tagi