002 - Ivysaur Multicolor Figurine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multicolor project for Ivysaur (フシギソウ, Fushigisou, Herbizarre, Bisaknosp) figurine.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 20
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
General Information
The Bulbasaur evolution line is my favorite and Ivysaur is my favorite Pokemon. I was having trouble finding a figurine that is both easy to print and suitable for multicolor printing. I found a great model by MF3Dtisk on Makerworld, but would have required 8-color printing to get the color scheme I wanted. Since my printer is only capable of 4-color printing, I decided to remix the model to suit my needs. The changes I made are:
Drastically simplify the model's geometry;
Split the leaves and bulb from the body;
Simplified internal geometry of the bulb to reduce print time.
Filaments Used
For this print I used the following PLA filaments listed below (also see attached PDF; all links are non-affiliate). I tired my best to match the RGB of this frame from the anime, while using what I had in stock.
![]() |
Source |
Body
Inland Matte PLA Light Blue
Inland Matte PLA Denim
Sunlu Basic PLA Magenta
FlashForge HS PLA White
Leaves & Bulb
Sunlu Basic PLA Grass Green
FlashForge HS PLA Light Brown
Sunlu Basic PLA Magenta
Sunlu Basic PLA Sakura Pink
Special Note
To match the bulb color as closely as possible, I interlaced (i.e., mixed) the Sakura Pink and Magenta to create a composite pink (see below).
![]() | |
![]() | ![]() |
Print Settings
I printed the model at 0.10 mm, using a 0.4 mm nozzle, with the following settings changed.
Quality | Seam Position: | Aligned Back |
Support | Support/raft base: | [color other than what it is interfacing with] |
Support/raft interface: | [color other than what it is interfacing with] | |
Multimaterial/Prime tower | Width: | 20 mm |
Prime Volume: | 20 mm³ |
Assembly & Finishing
Simply align the leaves & bulb to the body and affix with glue; I used cyanoacrylate.
Fill in the pupil with a sharpie or paint.



