Elegant M-VAVE FM-1 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An elegant protective case for your M-VAVE FM-1 synthesizer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Here is an elegant protective case for your M-VAVE FM-1 synthesizer, for grooving on the go.
The FM-1 simply slides into the case, and the cap closes with a click of the latch. To open, simply press on the sine wave and the latch will release the case cap.
Uses two M4x25 screws for the hinge.
You can view the case design in Onshape.
If this model helps you, please give it a Like! And please post makes, I would love to see the model being used!
Thanks to Zande Creates for the original FM-1 CAD model.
Recommended Print Settings:
Printer: Prusa MK4S
Nozzle: 0.4mm
Layer Height: 0.2mm
Material: Prusament PETG (Signal White)
PLA also possible, better for removing supports but degrades under UV light
Supports: recommended on the fillet overhangs close to the build plate if printing PLA.
Infill: 15%
Print Time:
Total: 4h8m (5h6m stealth)
If you plan to sell this model, you must respect the CC BY-SA license by providing the following attribution in the item description:
Source: "Elegant M-VAVE FM-1 Case" by perspector on Printables (https://www.printables.com/model/1908323-elegant-m-vave-fm-1-case).
This model is licensed under the CC BY-SA 4.0 license (https://creativecommons.org/licenses/by-sa/4.0/). Copyright (c) 2026 perspector.Happy printing (and groovin')!