Microlab bottom panel mount for Speaker Visaton FRS 8M
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple bottom plate with holes for a Visaton FRS 8M, mounts under the bottom cap
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 1
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
I modified the originally solid panel to have holes to mount the visaton speaker,
this worked but did slightly hang due to the weight, so i had my AI add some reinforcement ribs to increase stiffness.
this goes to the bottom of the microlab, facing down, allthough i suppose if you prefer it on the top, that is possible too - if you use it make sure you have the rest of your microlab fully enclused, the contents not sensitve to magnets, and don't cramp the inside too much, or your speakers sound quality will go down
i've used that to build a smart speaker (see makes)