Liczymy pasujące modele…
A merging of bigbluealien's and LvL_Dani's designs to fit a zimaboard on CB4D's Microlab. The tray is 1u and there is a little over 10mm of clearance from the back panel. Design 1 is centered but limits PCIe expansion compatibility,…
Peg to hold blanking panels on Microlab 6 inch rack. Screws or bolts are not needed to just hold the blanking panels, hence this model. Three sizes are published to suite different tolerances. Printing: I would recommend no brim if your…
The size of the STL files has been adjusted to match the LCD format.
The tolerances are a bit tight so you might need to sand it down a bit.
Version 2 is here! Meet the Microlab —a super compact, fully 3D-printable homelab that’s perfect for self-hosted tinkerers who love big ideas but small footprints. At just 5 inches wide and a tiny 160x160mm base, it’s even smaller than a…
Trying to get Noctua colors used esun pla+ brown and Paramount 3D PLA (Skin - Fair Complexion)
This is a collection of extra parts by 42.Computer for the “Microlab - Mini Modular Home Server Rack” by CB4D. The original design is very useful so I thought I'd be a good community member and contribute any parts I design for my own…
Now you can fit a Pi5 with the Pimoroni NVMe Duo Base!
I love CB4D's Microlab - Mini Modular Home Server Rack . It comes with a "Feet-Edge.stl", but I wanted a slightly thicker foot so it wouldn't sink into my carpet. So I modelled one. It's an easy print without supports. I used OnShape to…
I saw Djkleric's make with a screen and wanted one myself. His uses a 5" screen but i didn't like how it's slightly inset and couldn't sit flush, so i went for this smaller Waveshare 4.3" panel instead. All data and power is through the…
I love CB4D's Microlab - Mini Modular Home Server Rack . This is a tray for the Hive Hub , although mine has a grey logo so the new one might be slightly different. It's an easy print without supports. I used OnShape to sketch it out.
It might not be much use anymore but I couldn't bear to leave it out. Note this is for the Rpi1B NOT the B+, the B+ has standard position holes for mounting so doesn't need the snug fit of this tray
This design can hold Nino TNC and Raspberry Pi Zero in a single tray. This tray fits https://www.printables.com/model/1173286-microlab-mini-modular-home-server-rack Mounting: NinoTNC - M3 Screw Raspberry Pi Zero - M2.5 Screw
Peg to hold blanking panels on Microlab 6 inch rack. Screws or bolts are not needed to just hold the blanking panels, hence this model. Three sizes are published to suite different tolerances. Printing: I would recommend no brim if your…
Half-U panel for Microlab 6 inch rack with 2 x 9 pin D-Sub and Powerpole connector. Can be used with: https://www.printables.com/model/1173286-microlab-mini-modular-home-server-rack/files
Couldn't find a raspi 3b+ plate, so modelled it up and put it up here for you all. Print profile has a modifier for 6 walls & hex infill to allow for airflow around the pi.
Wanted an imperial style side panel for my microlab i built. came out just as i wanted it too and looks great with the soft glow of led lights illuminating from within. Removed material in the blank areas to speedup and save filament. I…
Microlab rear 2U panel with extra protrusion to allow for both cable clearance and cable entry/exit at the rear of the unit. Microlab design is great, the customisable modules work great! REQUIRES BRIM (i used 15mm brim with 0.05object…
I didn't like the cables running through, around or under the microlab, and then realised i hadn't used all the threaded holes around the side. So here it is, a cable organiser to guide (in my case) 2 ethernet cables around the side of…
In some applications, it is preferable for a Raspberry Pi (or similar SBC) to be mounted with the USB/Network cables contained within the full rack, and MicroSD card access via the front panel. This remix has mounting points and a cut-out…
In the Microlab X2 and Microlab X3 acoustic systems, the satellites consist of two parts rotating in a horizontal plane. Over time, the hinge lock fails. This part was developed to restore the hinge of the Microlab X2 acoustic system…
Microlab 2 — Modular 3D-Printable Mini Homelab Microlab 2 is a fully modular, open-source mini-rack system designed for makers, homelab enthusiasts, and anyone who wants a compact, customizable workspace for electronics or servers. Unlike…
Introducing the 1u Rack for mouting the Worked All OARC 2025 WSPR Kit build. 1u Rack Mount tray designed to fit into the Microlab Mini Modular Home Server Rack. Has mounting holes for the RaspberryPi Zero2W / WSPR Hat and also for a small…
Requirements M3 screw of at least 6mm. You must power the KVM using POE, since the USB C is blocked. It might be possible to just put a hole on the slicer, but I dont think the clearances with the Microlab will work. How to use Slide the…
MICROLAB - LOGITECH K380 KEYBOARD HOLDER Mount to hold a Logitech K380 bluetooth keyboard up & out of the way. Attaches to the base cap using 2 x M3x20 screws. If you like the print, you please drop a like!
2U - 8 x 2.5in SSH/HDD TRAY HOLDER - MICROLAB COMPATIBLE I had 5 drives (1 SSD + 5 HDD) in my nas. Temperatures were running higher on the drives than i was comfortable with. The drives in the upper position had the heat radiating from…
The size of the STL files has been adjusted to match the LCD format.
The tolerances are a bit tight so you might need to sand it down a bit.
Addons and modifications for Microlab for my setup Tray for Raspberry Pi 4 - 0.5U with inlet for USB cable to power Cudy network switch Tray for Kamrui AK1Plus Tray for Cudy 5-port network switch Top Cap modification for handles + handles…
This should work for both the v3 and v8 version. Noticed no models were made for this and it fits perfectly. Ignore the incomplete portion, that was a mess up on my own filament getting tangled, not the actual slicing process. Can…
I didn't bother posting the first iteration because it wasn't fitting any cape on. Also mini usb port was blocked so really remodeled it before uploading. Should fit most capes just be weary of cables sticking out. Make sure to push in…
This is a simple insert/tray for the Microlab 2 modular mini-rack system (designed by CB4D), made to securely hold a Philips Hue Bridge Pro. It can be mounted on any side of the rack. I have printed mine in Prusament PC Blend Carbon Fiber.
This is a simple insert/tray for the Microlab 2 modular mini-rack system (designed by CB4D), made to securely hold a Home Assistant Green. It can be mounted on any side of the rack. I have printed mine in Prusament PC Blend Carbon Fiber.
This is a vented faceplate for the Microlab 2 modular mini-rack system (designed by CB4D), designed to improve ventilation for components inside the rack. It can be mounted on any side of the rack. I have printed mine in Prusament PC…
This is a simple insert/tray for the Microlab 2 modular mini-rack system (designed by CB4D), made to securely hold a Philips Hue Play. It can be mounted on any side of the rack. Since the Hue Play is almost as wide as the Microlab 2…
Introducing the 1u Rack for mounting the BLE adapter board and NinoTNC. 1u Rack tray is designed to fit the Microlab Mini Modular Home Server Rack. Has holes on the base to accept threaded inserts and holes behind the front bezel to…
This is the speaker amplifier underbench mount that comes with Microlab FC361BT, FC550, FC660, FC360 and may be other.
Replacement backing plate where the RCA jacks connect to the speakers. The wood broke so I created this. See pics.
