2U - 8 x 2.5in SSH/HDD TRAY HOLDER - MICROLAB COMPATIBLE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2U - 8 x 2.5in SSH/HDD TRAY HOLDER - MICROLAB COMPATIBLE
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
2U - 8 x 2.5in SSH/HDD TRAY HOLDER - MICROLAB COMPATIBLE
I had 5 drives (1 SSD + 5 HDD) in my nas. Temperatures were running higher on the drives than i was comfortable with. The drives in the upper position had the heat radiating from the drive below and airflow was not ideal. Solved this by rotating the drives 90deg.
I now have space for 8 drives, with good airflow to keep them cool, with the original fan blowing upwards in the base of the rack now blowing cool air directly up between the drives.
Temps dropped from 38-39c down to 28-29c, i think that is a good improvement.
I printed in clear PETG, i wanted to see the lights and its come out just how i thought it would. :)
If you like the print, you please drop a like!