1 / 9
Bistake — zdjęcie 1
1 / 9

Bistake

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bistake is a print-in-place clip-and-stake designed to keep the corners of your towel firmly attached to the sand.

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Bistake is a print-in-place clip-and-stake designed to keep the corners of your towel firmly attached to the sand and prevent the wind from shifting or folding them. It consists of three hinged sections: two form the clip, while the third works as a sand stake.

Each Bistake prints in place as a single piece, with fully assembled hinges and no supports. Once folded, it becomes compact, and the included Carry Clip keeps a full set of four together for storage and transport.

After printing, the hinges need to be gently forced loose. We have included a short video showing how to do it. Handle them with care: it is a hinge, not a strength test.

To withstand beach heat, we recommend PETG. Braver makers can venture into ASA or ABS. PLA is best avoided.

The hinges were inspired by the excellent design created by @Tifn on Printables (https://www.printables.com/model/297906-vertical-customizable-hinge)

Tagi