1 / 4
Plugs for converting B&W AS6 subwoofer to a closed system. — zdjęcie 1
1 / 4

Plugs for converting B&W AS6 subwoofer to a closed system.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Removed the vent ports and inserted two of these plugs in the holes to change the subwoofer to a closed system.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
9
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial

I bought a new and more powerful amplifier and woofer element for my B&W AS6 subwoofer, so the original vent ports were too small to handle the increased airflow.
Decided to convert the cabinet to a closed system, it should give a more controlled and distinct bas from the same cabinet. Later tests have proven that the theory was correct, the subwoofer sounds much better now, with a deeper and precise punch compared with the original setup.

The vent port conversion was simple, remove the old vent port tubes, glue the 2 plugs in the holes so the cabinet became airtight. I added 400 gr. of dampening material inside the cabinet.

The amplifier installed: Dayton Audio SPA 300-D, the element: Dayton AudioRSS315HF-4 12" This element has a diameter of 28,2 cm - 1.2cm larger than the old element, so I used a router to increase the hole size.

The plugs have a tilted edge on the front and are flush with backside of the frontplate.
I used PETG prusa Galaxy Black, no support needed.

Tagi