1 / 4
Plugs for converting B&W AS6 subwoofer to a closed system. — image 1
1 / 4

Plugs for converting B&W AS6 subwoofer to a closed system.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Removed the vent ports and inserted two of these plugs in the holes to change the subwoofer to a closed system.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
11
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial

I bought a new and more powerful amplifier and woofer element for my B&W AS6 subwoofer, so the original vent ports were too small to handle the increased airflow.
Decided to convert the cabinet to a closed system, it should give a more controlled and distinct bas from the same cabinet. Later tests have proven that the theory was correct, the subwoofer sounds much better now, with a deeper and precise punch compared with the original setup.

The vent port conversion was simple, remove the old vent port tubes, glue the 2 plugs in the holes so the cabinet became airtight. I added 400 gr. of dampening material inside the cabinet.

The amplifier installed: Dayton Audio SPA 300-D, the element: Dayton AudioRSS315HF-4 12" This element has a diameter of 28,2 cm - 1.2cm larger than the old element, so I used a router to increase the hole size.

The plugs have a tilted edge on the front and are flush with backside of the frontplate.
I used PETG prusa Galaxy Black, no support needed.

Tags