Counting matching models…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Abwickler zum Umspulen von Filament auf eine andere Spule mittels Akkuschrauber wenn möglich im Übergang zum Gewinde 90% Füllgrad Die Version V2 bietet die Möglichkeit, innen eine Imbusschraube zu versenken, umd die Stabilität zu erhöhen.…
did not find a high-quality keychain model and decided to create my own version
Hi! Due to the gift I received from Bambu in the form of "Remote Controlled 16-color RGBW Puck Lights", I decided to remix my previous "Minecraft Ore" model to attach these LEDs. The lamp has a size of 120 mm x 120 mm x 120 mm. Fits…
A remix of Hexibase's subwoofer designed for clear side panels, so the cool waveguide is visible. It would also suit wooden sides. It's smaller than the Hexibase version, so it will print on a 19cm x 19cm print bed. I kept exactly the…
As I had some problems with removing (and inserting without a hammer) different types of inserts, I made my own version. This version has to be inserted in the correct way as it has a top (the thick side, see arrows on the back of the…
A simple box for one Shelly RGBW2 LED strip dimmer module and one 5-wire Wago splicing connector. Mounting holes for 2 screws inside. You need 2 flat-head M3x16 screws for box assembly. Jednoduchá krabička pro jeden stmívací modul Shelly…
This is a Z-axis guide with a thumbwheel that makes it easy to move the print head. This guide consists of two parts th
This part is a remix from this rial bracket: https://www.thingiverse.com/thing:4435764 I put the clamp in to a box, added Thread Inserts and a strain relief. Printing: PETG (for no special reason) 0.2 mm no supports Parts using Inserts:…
Subwoofer or speaker protection for 8 inch driver. Measurements: Guard face: Outer diameter: 200 mm Inner diameter: 176 mm Height: 10 mm Legs: Outer diameter: 263.9 mm Inner diameter: 239.9 mm Height: 30 mm Total height (legs+face): 40 mm…
Manual bed leveling the Anet A6/A8 is a little awkward and could be made a lot easier. There are some good solutions on the net - I took the best, made modifications and kept it simple. This solution allows you to cover the entire hotbed…
Basically Remix from https://www.printables.com/model/432569-digital-caliper-case-mitutoyo/comments. Added more space for Thumbwheel and changed the text font. Tested on Mitutoyo 500-196-30.
Cobweb Windmill YouTube Short. This is a 2-way spinning cobweb windmill with a themed tail-blade and a spider nut. Beautiful Windmill with a Halloween themed cobweb Propeller Design Self adjusting to wind direction through the Tail Blade…
Subwoofer port I designed for my cheap car subwoofer. Included is an .obj file so you can edit it to your own needs. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: Yes Resolution: 0.2625 Infill: 20%…
Also included STL's in case others didn't want to deal with the .3mf file.
The walls are 13mm and i made the volume at recommended for a vented enclosure excluded the speaker. It's built with tongue and groove for easy and strong assembly. Use low viscosity glue. The TCP115 is a very good woofer for the money. I…
Support: The case_bottom needs support. Nothing else requires support. Carefully remove the support in the case bottom before assembly. Printing the Geneva gear at 0.12 layer height is recommended for smoother operation as z-seams…
Introduction A few years ago @HexiBase_264072 built several versions of a 3D printed subwoofer using the Tang Band W3-1876S 3" driver. These designs take a very long time to print though, so I made a version of his design that is hollow…
Length : 188mm Width : 90mm Included is fusion360 file and STEP file, so you can edit it for your needs
🚇 Welcome to a whole new miniature world: TRAINS! 🚆 The most iconic cities in the world are well represented by their landmarks: the Empire State Building , the Eiffel Tower , royal palaces & magnificent religious buildings . MiniWorld3D…
Simple 4 Inch subwoofer using a Dayton Audio 4" long-excursion driver in a ported box. The box is braced and printed at 50% fill, although the brace is printed with 80% fill. I used cotton stuffing on the back and top wall near the…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
This model was designed with pretty narrow clearances. If you find that your loaders are binding inside your upper, you may need to do some sanding, or recalibrate your extruder and flow rate for better dimensional accuracy. If all else…
Instructions from creator: 0.3mm layers 3 shells 4 top and bottom solid 40% triangle infill I used 0.2mm layers
Oktober 2024: Version 18 mit detaillierteren Tritten. August 2024: Version 17 - neues Gehäuse und Dummy-Chasis für TTm hinzugefügt. Nehmt die Teile mit den höchsten Versionsnummer. Die Fenster wurden nicht neu exportiert, daher mit…
Sub woofers are using a combination of 3D printing and micro cement (jesmonite) the full range speakers can be printed in PLA. Build video and sound demo here:
In the 50's the Deutsche Bundesbahn started opperating the ETA150 battery powered railcars. https://nl.wikipedia.org/wiki/Baureihe_515 My goal is to my design 3D-print models of typical Dutch rolling stock. This German railcar does…
Building 3D Printed Speakers — Complete 2.1 Setup
Protective cover for Samsung Q990F. Printed from PLA, no supports required. Only additional hardware required for assembly is a little bit of double-sided sticky tape around the beveled edge. I just used four (4) small strips 90 degrees…
I've been working from home for over a year and felt my PC desktop audio system needed an upgrade. This sub-woofer is based on the Peerless Tymphany SDS-135F25CP02-04 5.25 inch driver which costs < $30. I 3d printed the cabinet using…
Add color change on the last one or two layers. Use PrusaSlicer 2.5 or higher, to slice with Arachne.
This is my take for a Shelly RGBW2 holder. It is compact as i could do it , leaving space for screws heads. I hope you
Source: https://grabcad.com/library/airbuszeroe-blended-wing-body-concept-1 Category: Vehicles
No support needed. Just clean the hole with a 5mm drill bit or with a knife after printing.
Here is my latest speaker system, it's a set of hi-fi grade speakers designed to be printable on small-bed 3D printers, including the Prusa Mini. It's a sub-woofer and satellite system usable as a 2.1 stereo system, or a home cinema…
Originally found HomeGrown3D's Ender 3 version while looking for new knobs for the KP3S and thought the locks were very clever (will be adding to my Ender very soon). Posting monsieurglad's files here simply for convenience as I am…
FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄 --- Z-axis lead screw knob for quick, manual movement of the bed, without…
If you're a retrogamer or a collector of retro tech, or if you like high quality audio and invested in a receiver with external speakers and a subwoofer, you've probably run (or know someone who ran) into the problem of RCA connectors…
These parts mount the Shellies vertically on a DIN rail to save space in width on the rail. The shellies are meant to be slid in from the front and snap into place once fully inserted. The snaplock onto the DIN rail is purposely quite…
This is a 3D printable cabinet for an 8" powered subwoofer by Deposition Sound LLC. If you have a medium/small living space that is in desperate need of thick, juicy, and fast bass, these are just for you! They have been carefully tuned…
A very easy to print cobweb
Just an holder for this usefull insert remover for honeycomb wall From : https://www.printables.com/fr/model/468669-insert-remover-honeycomb-wall-hsw/remixes A like - A comment and feedback is totally free for you and appreciate to go on…
Simple case & snap-on lid for the RTL8720DN BW16 board. I couldn't find any other models available for this board, so I made one! The snap-on lid press fits snugly, and has supports to help hold the board in place. Pins are exposed on the…
This is a 3D Printable model of a Fallout 4 Mini Nuke which has provision for a Bluetooth speaker and RGB lighting in a translucent top that can be used as a nightlight or just as a display piece. Re-Mix Notes The Fallout 4 Mini Nuke…
Print Prusament PLA 0,2mm structural printed on smooth backing, 100% first coat required, and clean backing. added color version, for white web and black spider
I took the Metro Azur last weekend. I saw being on a stair above the train that the top of the subway (apart front the front cab) is blue and not black. I add an additional part revetement blue that can be added over the black portion…
Ich wollte ein Spielzeug für mein kind haben was nicht gleich kaputt geht somit habe ich dieses Flugzeug entworfen, gedruckt mit 30% infill und eine 0,4 nozzle klappt der druck perfekt. Das Flugzeug ist fiktiv, frei erfunden über likes…
Intention to print these 4 parts and then use ½inch nominal (0.472 in) plywood for top and bottom. To use threaded rod (¼-20 or similar, those are 6.5mm holes) to clamp shut I'm finding 400-800g per part, so this is a plastic hog… I'm…
Printed with 0.2mm layerhight and 15% infill.
It's a compact, Gridfinity holder for the Harbor Freight Thumbwheel Ratchet set. I also include holes for a 3/8 drive extension and socket for my nozzles.
Try this as a smoother, less broken-up version: 20 cm x 20 cm Print Bed Version This is a modified version of the subwoofer enclosure, split into smaller parts so it can be printed on 20 cm x 20 cm print beds. I added connectors to make…
Protective cover for Samsung Q990F based on @aballacchi_1376836 design. The original file has about 5mm of clearance from the subwoofer cone surround in its natural position. I wanted to use up some PETG I had lying around, which has the…
This is a Diorama I created to be used with my NYC Subway Trains I released a few years ago https://www.thingiverse.com/thing:2756570 You will print one of each part except the pillars pick one of them and print it twice. No parts should…
Designed for the Edge 750W 10" car subwoofer You will need supports! 2 types, different mesh thickness!
I am converting a passive subwoofer to active, and so got this amplifier from amazon: https://smile.amazon.com/gp/product/B01N5DGK37/ It comes as a bare board, so I needed a case, this is it. The first run fit pretty well, I had to use a…
Adjusted model to fit Shelly RGBW PM Plus since the RGBW2 got discontinued.
Update history: [5/9] Add new variant [4/20] Fix missing feature
TPU Cases for the Kobo Clara BW. There are 3 versions! A thinner case, a thicker case, and a thicker case with bumps on the corners. Personally, the thinner case is a bit too thin for me to be properly protective, and I find that the…
Tool holder for Harbor Freight Thumbwheel Ratchet Set . I recommend printing it face up. Two different versions, one with recessed numbers and one with raised.
Full disclosure: I set out to make a more compact version of the HYQ14FBW Toyota key fob for my 2024 Corolla Cross Hybrid, but by the time I modeled in the ability to hold the valet key ("Full Size"), it's not too far from the original…
Adapter Abwasserrohr Hobby 2013 auf DN32 Durchmesser Abwasserrohr: 27,7mm 28mm Rohr auf DN32 Muffe, Dichtung kann in die DN32 Muffe eingelegt werden. Ich habe das Rohr mit der DN32 Seite auf den Drucker gestellt und mit Stützen auf dem…
Ich wollte ein Spielzeug für mein kind haben was nicht gleich kaputt geht somit habe ich dieses Flugzeug entworfen, gedruckt mit 30% infill und eine 0,4 nozzle klappt der druck perfekt. Das Flugzeug ist fiktiv, frei erfunden über likes…
My subwoofer enclosure. Printed in PLA at 25% infill The feet were printed in TPU and glued to the bottom of the subwoofer.
I've created this model for coupling my subwoofer in my office. The subwoofer sits on a carpet which is, to my understanding, is not ideal for the sound waves. Therefore, I created this model and used double-sided tape to attach it.…
SUBWAY SUPREME logo paperweight for hypebeasts to waste their filament on! Comes in two sizes, 15mm and 30mm thickness. Print out each separately in their respective colour and fit together. Print pictured is 0.3mm layer height. If you…
Der Deckel passt auf HT/KG Rohre der Größe DN40, DN50, DN75
This is part five of my SCI FY Train, the addition of the People Transport! Run it as a stand alone mono subway, with two cars together, or add it to the engine. The inside is hollow and you can see inside the windows. No support…
Hallo Zusammen! Hier habe ich einen faltbaren Petanque Abwurfkreis mit einen Innendurchmesser von 50cm. Die äußeren Pins müssen etwas eingepresst werden, weil sonst der ganze Kreis zu locker wird. Anschließend werden die Pins ineinander…
Why I wanted a softer grip for the thumbwheel, so I split the model in two: a core and a grip. These can be printed seperately in different materials. I chose TPU for the grip, and PETG for the core. Printing & Assembly The print settings…
This design allows you grind directly into the portafilter. It reuses the original portafilter fork. You will need an m3x3 insert
Minimal wall mount for the Shelly Plus RGBW PM controller. Should also work for other Shelly controllers that use the same dimensions. Retention clip on terminal side allows for mounting in any orientation. Printing suggestions: Height: ≤…
model upload https://www.youtube.com/watch?v=dpwPDGCEb80 design by Nathan Bulle
Ich habe für meine Waschmaschine ein Anschlussstück 3/4 Zoll für den Abwasserschlauch am Waschbecken erstellt. Gedruckt habe ich ihn mit ABS, geht wunderbar. Category: Household Supplies
Da ich keinen passenden Adapter gefunden habe, der es möglich macht, Taschen mit dem Lochkoppel-System (der Bundeswehr) an einem Molle-System zu befestigen, habe ich diesen selber konstruiert. Beste Druckausrichtung: Locher müssen ggf.…
This is a 1:6 scale replica of the legendary SVS PB-17 Ultra home theater subwoofer. It's designed mostly just as a toy but I was surprised how good it actually sounds! Definitely a decent bluetooth speaker. UPDATE: I just made a larger…
Can you no longer sleep well at night because you are afraid that the 3D printer will catch fire? :D Then we have the solution for you here! BW24-Cookie is an automatic, self-igniting powder extinguisher to delete fire. This bracket…
An upgrade hotbed thumbwheel. There's a very tight clearance at the back of the Anet A8. Used these spring bushings: https://www.thingiverse.com/thing:2146448 Print instructions Category: 3D Printer Parts
Simple Shelly rgbw2 holder, glue strip did not hold, so I made this. No supports needed. Category: Tool Holders & Boxes
Update june 2024: IT still WORKS, I had it in my car for over 16 months and ABS survive -30C to +40C (outside temps). Sounds amazing!!! I love this mod so far and I don't want to get rid of the car because of it. 10 inch Subwoofer adapter…
I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. Hope you like it. Enjoy it.
check out this remote holder for honeycomb storage wall
A remix based on Fix Daily's great design. This version is adapted specifically for the BW150 model, considering it is the most feature-rich Electronic Load currently available. For anyone needing to test batteries, this model is the…
Dust cover for the Blitzwolf BW-V5 Projector lens I printed this at 0.2mm resolution with a 0.6mm nozzle and it fits nicely and shouldn't fall out easily.
This bracket allows you to mount a RX8 DBW pedal into the FD3s RX7 chassis without modification to the chassis or pedal. Should be pretty easy to print, and I would suggest doing it in ABS or PETG only and use a heavy infill. You'll want…
This model is a remix from thingiverse user boxter. It can hold a Shelly Plus RGBW PM on a 35mm Rail.
There are 2 versions included. “Fitter” is slightly tighter, depending on the tolerance of the printer. If you need a really tight seal, you can also print the TPU seal. Es sind 2 Versionen enthalten. “Fitter” ist etwas enger, je nach…
Made for SVS Subwoofers but can be used with others aswell. Needs a ¼-20 bolt, 15-20mm length I used ABS-GF and TPU 90A to print these parts. For feet i used 2 walls with 8% gyroid infill with 90A TPU, that gave good results with SVS…
Printed in PETG with 0.2mm layerhight and 15% infill
Ich habe den U-Bahn Typ U der Wiener Linien als Standmodell für Spur N konstruiert und für den 3D-Druck optimiert. Das Modell eignet sich für Modellbahnanlagen, Dioramen oder Sammlungen im Maßstab Spur N. Gedruckt wurde das Modell auf…
This enclosure is designed to hold: 1x Shelly Plus RGBW PM 1x Wago 221-412 1x Wago 221-413 If you want to use machine screws, you will need (M3 or M4 may work but I didn't check): 8x 6-32 heat set inserts 8x 1" 6-32 screws You could also…
You’ll need this if you are doing a sound isolation in your MK5 Supra to fix the subwoofer rattle. Follow one of the tutorials below https://www.supramkv.com/threads/how-to-improve-oe-sub-bass-quality-and-eliminate-vibrations.5092/ I have…
I swapped out the stock speaker in my Stern Godzilla, RUSH, and Iron Maiden for a Blaupunkt GBW801 subwoofer. Because these speakers are mounted INSIDE the cabinet (unlike a subwoofer box for a car stereo), they require something to lift…
