CREALITY K1, K1 MAX, K1C Z-AXIS KNOB, THUMBWHEEL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Z-axis lead screw knob for quick, manual movement of the bed, without homing.
- Rating
- 0 / 5
- Likes
- 83
- Downloads
- 316
- Makes
- 2
- Views
- 4,227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations
Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄
---
Z-axis lead screw knob for quick, manual movement of the bed, without homing.
Designed for Creality K1, K1 Max, K1C or any other printer using 8 mm diameter leadscrews.
The ribs are quite tight, so your printer/filament will need to be well calibrated.
Note that this will reduce your total print height by around 15 mm.
1x M3x8 or M3x6 Hex screw and M3 threaded insert.
---
No support is required for printing, as the parts are already in the right direction for printing.
Ideally, you should use a heat-resistant filament to prevent warping.
- Nozzle 0.4 mm
- Layer height 0.16 mm or less
- 3 perimeters
- 20% fill