Counting matching models…
Manual bed leveling the Anet A6/A8 is a little awkward and could be made a lot easier. There are some good solutions on the net - I took the best, made modifications and kept it simple. This solution allows you to cover the entire hotbed…
Basically Remix from https://www.printables.com/model/432569-digital-caliper-case-mitutoyo/comments. Added more space for Thumbwheel and changed the text font. Tested on Mitutoyo 500-196-30.
Support: The case_bottom needs support. Nothing else requires support. Carefully remove the support in the case bottom before assembly. Printing the Geneva gear at 0.12 layer height is recommended for smoother operation as z-seams…
It's a compact, Gridfinity holder for the Harbor Freight Thumbwheel Ratchet set. I also include holes for a 3/8 drive extension and socket for my nozzles.
Update history: [5/9] Add new variant [4/20] Fix missing feature
Tool holder for Harbor Freight Thumbwheel Ratchet Set . I recommend printing it face up. Two different versions, one with recessed numbers and one with raised.
An upgrade hotbed thumbwheel. There's a very tight clearance at the back of the Anet A8. Used these spring bushings: https://www.thingiverse.com/thing:2146448 Print instructions Category: 3D Printer Parts
Thumbwheel for M3, M4, M5, or customize size for other size taps. 24mm knurled diameter friction fit. This uses the knurledFinishLib_v2.scad library developed by aubenc here: https://www.thingiverse.com/thing:32122
Thumbwheel remix, added additional knob handles. My make of Bench Mountable is tight and as the original author described, the first 20 open-close cycles were a pain without this handle. Other parts are from original model:…
Simple thumbwheel for Duplicator I3 and Cocooncreate machines. The thumbwheel has an embedded M3 nut dimensions 5.97mm (flat to flat) and 2.50mm high. You will need to set your slicer software to pause at around the 3.5mm - 3.6mm mark…
Sasha D's Crayford-style focuser for the Hadley telescope is excellent! I highly, highly recommend it. Focus adjustments are MUCH smoother with the Crayford-style focuser. I ended up stripping the plastic threads on one of the setscrews…
This is a large bed leveling thumbwheel for large FDM printers that have room for it and use M4 screws for leveling. I made this for my CTC A10S, a CR-10 clone, after one of the miniature factory nuts disintegrated. These thumbwheels…
Small 18mm thumbwheels from manually adjusting beds on assorted derivative i3 kit printers. Replaces smaller metal thumbscrew nuts and wing nuts but should not bump into anything. An M3 screw has a 0.5mm thread pitch when means a full…
For M3 stainless steel nut that are 5.5mm wide. I tried the other thumb wheel on here, but it did not fit the M3 nuts I got from my local Ace Hardware. I used a black Sharpie marker to give some contrast. November 2016 UPDATE: I have a…
The file contains replacement knobs, and a replacement pin. The replacement pin is for the shorter screw. Use one M2 screw and nut for the short screw, and one M3 screw and nut for the long one. It is normal that the M3 head seats over…
This design will allow this ¼" thumbwheel ratchet (and perhaps others) to be housed in a plastic socket set case, presuming there's room for it someplace. It has retaining tabs to keep it from falling out and a slot to get a finger in…
More comfortable wheels for leveling the FlashForge bed. Created in Tinkercad
A cap that goes directly over the VKB STECS thumbwheel. Should work for all versions as it goes on top of existing part. -Update: I added a V2 I think is more comfortable
Use PETG if the caliper stays in your garage or workshop during the summer, else use whatever. Glue in place of the old plastick holder.
The file contains replacement knobs, and a replacement pin. The replacement pin is for the shorter screw. Use one M2 screw and nut for the short screw, and one M3 screw and nut for the long one. It is normal that the M3 head seats over…
Hello, this is precision thumbweel for CTC A10s (CR10 clone) This wheel was inspired by idig3d's CR-10 Precision Thumbdial I tried this model but it would not fit. CTC uses slightly different original dial Oiginal has 18 small protrusions…
Thumbwheel lock for Kingroon KP3 with a little Mod to give enough gap for Silicon Bed Spacers
Printed some in PLA, PETG and TPU. No support is needed: There is thin “plug” in the hole that acts as support for the hexagon. It is easily removed by hand with an 8mm bit or a knife.
No support needed. Just clean the hole with a 5mm drill bit or with a knife after printing.
Thumbwheel for the plug on the front of a Wavian NATO-style water jug
toolbox drawer holder for thumbwheel ratchets, keep your junk organized: one hole each for ¼, 3/8 and ½" drives. Wide base so you really have to slam your drawers like a gorilla to get these to fall over, but hey, I don't judge. matches…
Use PETG if the caliper stays in your garage or workshop during the summer, else use whatever. Glue in place of the old plastick holder.
Yet another thumb wheel for a M3 bolt. Category: 3D Printer Parts
A M5 thumbwheel for magic Arm. The original thumbnut came broken so I designed and printed another one. Category: 3D Printer Accessories
Thumbwheel for M3 standard and nyloc nuts. Used for levelling the bed on a Prusa Mendel. Designed to be a tight fit around the nut so it doesn't fall off. Instructions There are 2 STL files, one is for standard nuts, and one is for nyloc…
There are so many thumbwheels to pick from and I tried a few. That said they always seems "not just right" I liked the original adjustment wheels that came with my Monoprice Maker Select. They had some heft to them that the printed ones…
Originally found HomeGrown3D's Ender 3 version while looking for new knobs for the KP3S and thought the locks were very clever (will be adding to my Ender very soon). Posting monsieurglad's files here simply for convenience as I am…
This knob/thumbwheel is designed for M3 hex head bolts. Category: Parts
Why I wanted a softer grip for the thumbwheel, so I split the model in two: a core and a grip. These can be printed seperately in different materials. I chose TPU for the grip, and PETG for the core. Printing & Assembly The print settings…
Dies ist mein 60mm Stellrad für eine M4 Mutter. Meine Hauptanwendung war der Austausch der viel zu kleinen Schrauben unter der Heizplatte vom Alfawise U20 3D Drucker. print speed: 60mm/s layer height: 0.2 20% infill no support needed!…
Simple, low profile holder for thumbwheel ratchets. Used my Harbor Freight Tools 3pc thumbwheel ratchet set as a measurement guide. May fit other brands. I printed mine with gyroid infill and 0 top/bottom layers.
Gridfinity Thumbwheel ratchet set holder. Modified my original model to work with gridfinity. My ratchet set it from Harbor Freight “Pittsburgh Pro” brand, but may fit others.
Really liked this Gridfinity holder for my thumbwheel ratchets from Harbor Freight. Made a few changes to make it fit into my Gridfinity setup a little better.
I needed some friction tensioners for a balance arm I was building, and since I had plenty of 1/4 inch x 20 TPI hardware, this is what I came up with.
This is a Z-axis guide with a thumbwheel that makes it easy to move the print head. This guide consists of two parts th
Wera Kraftform Turbo Mod for Single Handed Operation
Anycubic Mega Zero v1.0 Bed Thumbwheels are a remix - I made these taller with inset M3 nuts specifically for Mega Zero v1.0's with Heated Bed upgrades that larger than the stock bed (via adapters). I recommend these be printed in ABS+…
I designed and then printed this thumbwheel out of PLA filament. No supports are needed and I kept resolution low just because I needed the part in a hurry. You just glue the thumbwheel to the aluminum adjuster. Just make sure you line up…
FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄 --- Z-axis lead screw knob for quick, manual movement of the bed, without…
UPDATE: make it much better i print it in 0.1 mm layer h Like the source with the scale in mm but want more grip so here is it :-) i use it for bed leveling Category: 3D Printer Parts
Simply mod of the original thumbwheel to add some handles around the outside. Doesn't obscure the text or arrows. Print with gear teeth on the build plate and supports for the bottom of the non-toothed part.
Both the puller body and the thumb-wheel use a standard M3x6mm hex spacer rather than just an M3 nut, which might deform under pressure. Two M3 mudguard or nylon washers improve operation smoothness, transferring the pressure to a larger…
