1 / 2
CREALITY K1, K1 MAX, K1C Z-AXIS KNOB, THUMBWHEEL — zdjęcie 1
1 / 2

CREALITY K1, K1 MAX, K1C Z-AXIS KNOB, THUMBWHEEL

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Z-axis lead screw knob for quick, manual movement of the bed, without homing.

Ocena
0 / 5
Polubienia
83
Pobrania
316
Wydruki
2
Wyświetlenia
4227
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations

Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄

---

Z-axis lead screw knob for quick, manual movement of the bed, without homing.

Designed for Creality K1, K1 Max, K1C or any other printer using 8 mm diameter leadscrews.

The ribs are quite tight, so your printer/filament will need to be well calibrated.

Note that this will reduce your total print height by around 15 mm.

1x M3x8 or M3x6 Hex screw and M3 threaded insert.

---

No support is required for printing, as the parts are already in the right direction for printing.

Ideally, you should use a heat-resistant filament to prevent warping.

  • Nozzle 0.4 mm
  • Layer height 0.16 mm or less
  • 3 perimeters
  • 20% fill

Tagi