HTPC Steam machine mini ITX case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HTPC
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
HTPC "Steam machine" based on mini ITX, AIO and full GPU
Hard requirement for build were silence and no flashy RGB. Only RGB mounted is there to show status and it is controlled by OpenRGB (works both Win and Linux)
Components used are:
Gygabyte a620 i ax
Noctua AIO 240
XFX Swift AMD Radeon RX 9070
GAMEMAX GS-850G SFX Power Supply PC 850W
100mm rizer pcie 5.0
17 LED ARGB Strip https://www.amazon.de/dp/B0H3DJHSZG?ref=ppx_yo2ov_dt_b_fed_asin_title
I will post .stp file only, if anyone wants to make this case, at least GPU will have to be adjusted.
About 25 pcs of M3 rutex brass inserts size 4.2x4mm and M3 screws lenghts 6-20mm.
If hole is 4,2mm diameter, it is for insert.
Pieces that are glued together are designed in a way that glue is hidden. There is nothing in printing uglier than visible leaked glue.
Temps inside are easily manageable. CPU is 105W and noctua can easy handle it in a quiet way. Max temp reached was 63°C.
GPU retains all air outside of the case, only small amount is leaked from the back of the GPU back into case. I cannot push GPU over 67°C no matter what game I play on 4k.
Meshes are attached by 6x2 magnets.
I used PET-CF for printing. Easy to print and can survive temps and loads. Besides, it has beautiful texture.
Printed with 0.6 nozzle 3 walls, 4 top/ bottom.
Unfortunately, I cannot export from Fusion with parts names.