1 / 7
YI 1080p Home Camera Parametric Window Mount — zdjęcie 1
1 / 7

YI 1080p Home Camera Parametric Window Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parametric OpenSCAD window mount for the YI 1080p Home Camera

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Public Domain

Parametric OpenSCAD window mount for the YI 1080p Home Camera with 3.00 mm plate thickness, 58.00 mm upper ring width, 45.80 mm camera through-bore with 0.42 mm 45° edge chamfers based on YI specs: https://api.yitechnology.com/yi-1080p-home-camera-specs

Printable Parts

Part

Selector (part=)

STL File

Description

Window base

"window_base"

yi_window_base.stl

70 × 72 × 3.0 mm squared plate with 7 mm rounded corners and 20 mm ball stud

Camera holder

"camera_holder"

yi_camera_holder.stl

Elongated 58 × 145 × 3.0 mm truss-lightened surfboard plate (flat rear face, 45.80 mm chamfered camera hole) + 22 × Ø13 mm hollow-core spacer rod + stress-relieved externally-threaded 4-slot ball socket collet

Tightening nut

"tightening_nut"

yi_tightening_nut.stl

Fluted Ø35 × 15 mm collar nut with internal helical thread and conical clamping bore to lock the ball joint

Set part = "assembly" in yi_window_mount.scad for the assembled preview (with optional translucent camera module envelope and preview_pitch / preview_yaw articulation).

Key Parameters

Parameter

Default

Description

plate_width / plate_height / plate_thickness

70 / 72 / 3.0 mm

Squared window base plate (3 mm thick)

holder_width / holder_mid_width / holder_tail_width

58 / 42 / 26 mm

Slimmer surfboard widths (upper camera ring, mid-waist, lower tail)

holder_lobe_spacing / holder_thickness

102.0 / 3.0 mm

+2 cm taller center-to-center spacing (144.85 mm total height) and 3 mm plate thickness

enable_truss_cutouts / holder_rail_width / holder_spine_width

true / 5.5 / 5.5 mm

Symmetric filleted truss cutouts + central spine (reduces material while adding continuous perimeter walls in PETG)

camera_hole_diameter / plate_edge_chamfer

45.80 / 0.42 mm

Exact bore and 45° chamfer from samples/mounting-plate.stl

rod_length / rod_diameter / rod_bore_diameter

22.0 / 13.0 / 5.8 mm

Spacer rod with coaxial hollow core (adds 4 inner perimeter walls in slicer while keeping rear bed face flat)

ball_diameter / socket_clearance

20.0 / 0.45 mm

Ball size and socket running clearance

socket_mouth_ratio / socket_wall

0.965 / 2.2 mm

Gentle snap entry (19.3 mm mouth + 1.6 mm lead-in ramp) and flexible tooth wall

socket_slot_width / socket_keyhole_diameter

2.2 / 3.2 mm

Collet slot width and circular stress-relief keyholes at slot roots

thread_pitch / nut_thread_clearance

3.0 / 0.45 mm

Collet thread pitch and radial thread clearance



Print Recommendations:

  • Material & settings: PETG (recommended) or PLA, 0.2 mm layer height, 4 walls, 25–30% gyroid infill.

  • Orientation:

    • yi_window_base.stl: flat adhesive face on the build plate (ball pointing up).

    • yi_camera_holder.stl: rotate -90° around X so the completely flat 3.0 mm back of the surfboard plate lies flush on the build plate and the rod + threaded socket point straight up (prints with no supports).

    • yi_tightening_nut.stl: already oriented flat on the build plate (prints with no supports).


Made in pair with Gemini 4 Argon, over a course of 4 iterations (4 prompts and 2 prints).

Tagi