1 / 7
YI 1080p Home Camera Parametric Window Mount — image 1
1 / 7

YI 1080p Home Camera Parametric Window Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Parametric OpenSCAD window mount for the YI 1080p Home Camera

Rating
0 / 5
Likes
1
Downloads
0
Makes
0
Views
18
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Parametric OpenSCAD window mount for the YI 1080p Home Camera with 3.00 mm plate thickness, 58.00 mm upper ring width, 45.80 mm camera through-bore with 0.42 mm 45° edge chamfers based on YI specs: https://api.yitechnology.com/yi-1080p-home-camera-specs

Printable Parts

Part

Selector (part=)

STL File

Description

Window base

"window_base"

yi_window_base.stl

70 × 72 × 3.0 mm squared plate with 7 mm rounded corners and 20 mm ball stud

Camera holder

"camera_holder"

yi_camera_holder.stl

Elongated 58 × 145 × 3.0 mm truss-lightened surfboard plate (flat rear face, 45.80 mm chamfered camera hole) + 22 × Ø13 mm hollow-core spacer rod + stress-relieved externally-threaded 4-slot ball socket collet

Tightening nut

"tightening_nut"

yi_tightening_nut.stl

Fluted Ø35 × 15 mm collar nut with internal helical thread and conical clamping bore to lock the ball joint

Set part = "assembly" in yi_window_mount.scad for the assembled preview (with optional translucent camera module envelope and preview_pitch / preview_yaw articulation).

Key Parameters

Parameter

Default

Description

plate_width / plate_height / plate_thickness

70 / 72 / 3.0 mm

Squared window base plate (3 mm thick)

holder_width / holder_mid_width / holder_tail_width

58 / 42 / 26 mm

Slimmer surfboard widths (upper camera ring, mid-waist, lower tail)

holder_lobe_spacing / holder_thickness

102.0 / 3.0 mm

+2 cm taller center-to-center spacing (144.85 mm total height) and 3 mm plate thickness

enable_truss_cutouts / holder_rail_width / holder_spine_width

true / 5.5 / 5.5 mm

Symmetric filleted truss cutouts + central spine (reduces material while adding continuous perimeter walls in PETG)

camera_hole_diameter / plate_edge_chamfer

45.80 / 0.42 mm

Exact bore and 45° chamfer from samples/mounting-plate.stl

rod_length / rod_diameter / rod_bore_diameter

22.0 / 13.0 / 5.8 mm

Spacer rod with coaxial hollow core (adds 4 inner perimeter walls in slicer while keeping rear bed face flat)

ball_diameter / socket_clearance

20.0 / 0.45 mm

Ball size and socket running clearance

socket_mouth_ratio / socket_wall

0.965 / 2.2 mm

Gentle snap entry (19.3 mm mouth + 1.6 mm lead-in ramp) and flexible tooth wall

socket_slot_width / socket_keyhole_diameter

2.2 / 3.2 mm

Collet slot width and circular stress-relief keyholes at slot roots

thread_pitch / nut_thread_clearance

3.0 / 0.45 mm

Collet thread pitch and radial thread clearance



Print Recommendations:

  • Material & settings: PETG (recommended) or PLA, 0.2 mm layer height, 4 walls, 25–30% gyroid infill.

  • Orientation:

    • yi_window_base.stl: flat adhesive face on the build plate (ball pointing up).

    • yi_camera_holder.stl: rotate -90° around X so the completely flat 3.0 mm back of the surfboard plate lies flush on the build plate and the rod + threaded socket point straight up (prints with no supports).

    • yi_tightening_nut.stl: already oriented flat on the build plate (prints with no supports).


Made in pair with Gemini 4 Argon, over a course of 4 iterations (4 prompts and 2 prints).

Tags