1 / 6
NixOS Flake Logo LED Sign — zdjęcie 1
1 / 6

NixOS Flake Logo LED Sign

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3D-printed NixOS LED sign I designed as a personal project.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

It consists of a main housing, a rear plate and a magnetic rear cover. The front uses PETG diffuser design, printed together with the housing using two different colors.

The rear cover is held in place with  6×2 mm magnets 4 pieces in total.

I used ESP32-S3 Supermini to wire 6 different WS2812x LED strip channel separately at the same time, you can use ESP32-C3 if you like to (but it only supports 2 channel so you'll have to wire them differently) or your favorite MCU to setup. I tested in WLED for software based controlling through Wi-Fi.

Also printed with Creality Soleyin Basic PETG White & Black filaments. Especially white color of the filament series are pretty good for light diffusion. I didn't tested and not guarantee same diffusion performance on other materials. 

The design is shared freely. Feel free to experiment with your own LED setup.

Tagi