NixOS Flake Logo LED Sign
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D-printed NixOS LED sign I designed as a personal project.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Share Alike
It consists of a main housing, a rear plate and a magnetic rear cover. The front uses PETG diffuser design, printed together with the housing using two different colors.
The rear cover is held in place with 6×2 mm magnets 4 pieces in total.
I used ESP32-S3 Supermini to wire 6 different WS2812x LED strip channel separately at the same time, you can use ESP32-C3 if you like to (but it only supports 2 channel so you'll have to wire them differently) or your favorite MCU to setup. I tested in WLED for software based controlling through Wi-Fi.
Also printed with Creality Soleyin Basic PETG White & Black filaments. Especially white color of the filament series are pretty good for light diffusion. I didn't tested and not guarantee same diffusion performance on other materials.
The design is shared freely. Feel free to experiment with your own LED setup.