1 / 9
LED Test Tube Rack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sample rack for five 16 mm test tubes, each lit from below by one WS2812 LED.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (2)Powiązane
A cyberpunk / industrial style rack for five 160x16 mm test tubes. Each tube stands on its own WS2812 LED, so it glows in any colour you like. Made for WLED or ESPHome.
Everything prints flat, with no supports. Screws are all M3 self-tapping cylinder head: 4x M3x16 for the base, 8x M3x12 through the end plates. You need a 30 LED/m strip cut to 5 LEDs - they draw about 0.3 A at 5 V, so USB power is fine.