Skadis Flexture Hook Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip to hold Ikea Skådis hooks securely, with no wobble.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v3.0
I liked the original design, but found the hole was too large, letting the hooks rattle around and move slightly. Trying to remix it with a smaller hole, pushing the hook home would put the center under tension, breaking it. By turning the rear into a flexture, it allows the clip to move forwards slighty as the hook goes in, flexing the sides outward for the hook to pass, then back in, locking it against the board.
The third image shows all three versions:
1. Original, hole larger than hook wire diameter.
2. Smaller hole, closes securely on hook but breaks if used in Skådis board.
3. Flexture remix. The prongs at the rear can flex backward and inward, creating room for the front section to flex and admit the hook.
.step file provided in case you need to remix this too.
I like to use these in combination with JayKeyStk's Lockplugs to completely fix the hooks in place: https://www.printables.com/model/52120-ikea-skadis-pegboard-lock-plugs-and-secure-hooks/