Village Bread Oven - Paintable Nativity Scenery | 3 Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A decorative bread oven for Nativity villages and dioramas, with a separate paving deck. Unprinted.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution
A decorative miniature bread oven for a painted Nativity village or diorama. The design combines a plaster-style dome, wedge-stone entrance and coursed stone base.
THREE SEPARATE PARTS
Frame: the stone base with an open upper bay before assembly.
Deck: the separate paving slab.
Oven: the dome, entrance and chimney.
Nominal assembled size: 84 x 72 x 74.4 mm. Dimensions are from the CAD model.
FILES AND ASSEMBLY
Three STL files, three geometry-only 3MF files, a standalone editable OpenSCAD source, source ZIP and EN/IT notes are included.
Each 3MF contains one centred part in millimetres. Import and arrange the parts using your own printer configuration.
Place the paving deck on the frame and the oven body above it, as shown in the assembled and exploded views. The flat interfaces have no locating pins; dry alignment and flatness remain to be tried before deciding on a permanent assembly method.
PRINTING AND VERIFICATION STATUS
This model has not yet been physically printed.
The exported geometry was checked and sliced offline. The diagnostic slicing generated supports for the Frame and Oven; the Deck produced toolpaths without supports in that test. Review your own support strategy and removal access before printing.
Physical fit, support removal, adhesion, painting and stability remain untested. Images are renders made from the supplied geometry.
RIEPILOGO ITALIANO
Forno decorativo in miniatura per il borgo del presepe o un diorama, con basamento in pietra, piano separato e corpo del forno.
Tre parti, ingombro nominale assemblato 84 x 72 x 74,4 mm; STL, 3MF geometrici e sorgente OpenSCAD modificabile.
Non ancora stampato. Il telaio e il corpo del forno hanno generato supporti nella verifica digitale; montaggio, rimozione dei supporti, pittura e stabilita reali sono da provare. Le immagini derivano dai file effettivi.
Village scenery collection / Raccolta del borgo: Nativity Village Scenery - MARGRAF ITALY. The complete grotto remains in development.