SVBONY SV179 Two-Hole Base to Telescope Dovetail Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for SVBONY SV179 Two-Hole red dot finder to telescope dovetail shoe. Tested on SVBONY MK127
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SVBONY SV179 Two-Hole Base to Telescope Dovetail Adapter
Why I created this adapter
I purchased the SVBONY SV179 Red Dot Finder with Universal Two-Hole Fixing Base for my SVBONY MK127 Maksutov telescope.
Unfortunately, I didn't realize that SVBONY offers the SV179 with two different mounting options: a telescope dovetail base and a universal two-hole fixing base.
I bought the wrong version for my telescope.
Rather than replacing the finder, I decided to design and 3D print an adapter using the excellent parametric model originally created by Bike Cyclist.
The result is a custom adapter that allows the two-hole version of the SV179 to be mounted directly onto the telescope's finder shoe.
Compatibility
Tested with:
Telescope: SVBONY MK127 Maksutov
Red dot finder: SVBONY SV179 – Universal Two-Hole Fixing Base
Mounting interface: Finder shoe supplied with the MK127
Important: This adapter is designed specifically for the SV179 with the Universal Two-Hole Fixing Base. It is not intended for the version already supplied with a telescope dovetail base.
Compatibility with other telescopes and finder shoes has not been tested.
Design details
The original NATO/Picatinny rail was replaced with a custom dovetail profile matching the SV179 mounting interface.
Upper mounting rail:
Overall width: 14.94 mm
Narrow section width: 12.30 mm
Total height: 4.80 mm
Lower straight section height: 2.30 mm
Rail length: 40 mm
Lower astronomical dovetail:
Adjusted to fit the SVBONY MK127 finder shoe
Theoretical base width before chamfering: 33.9 mm
Original dovetail angle preserved
The upper rail was also repositioned to align one end with the lower section. This creates a flat end face, allowing the entire adapter to be printed vertically without supports.
3D printing
Printer: Creality K1
Tested materials: PLA and ASA
Recommended material: ASA
Print orientation: Standing vertically on the aligned end face, with the 40 mm rail length along the printer's Z-axis.
Supports: Not required.
I first printed a prototype in PLA. The upper mounting rail fitted the red dot finder, but the fit was quite tight.
I then printed the same model in ASA without changing the dimensions. Due to slight material shrinkage, the ASA version fitted smoothly and securely.
Printing vertically also keeps the complete dovetail cross-section within each printed layer, reducing the risk of the narrow upper rail splitting along layer lines when clamped.
For ASA, an enclosure and a brim are recommended to improve bed adhesion and reduce warping.
Files included
STL: Ready-to-print adapter
OpenSCAD (.scad): Parametric source file for further modifications
If your telescope uses a slightly different finder shoe, you can adjust the lower dovetail dimensions in OpenSCAD.
Please note that dimensional tolerances may vary depending on your printer, material and slicer settings.
Credits
This model is a remix of:
Parametric Red Dot Finder Mount – Astro Dovetail to NATO/Picatinny Rail by Bike Cyclist.
https://www.printables.com/model/53259-parametric-red-dot-finder-mount-astro-dovetail-to-
Many thanks to the original author for providing the parametric OpenSCAD design, which made this modification possible.
License: Creative Commons Attribution–NonCommercial–ShareAlike 4.0 (CC BY-NC-SA 4.0).