P
Printables
Svbony 503 80ED Bahtinov Mask
I have just reposted this from Thingiverse. This is a Bahtinov mask for the Svbony 503 80ED refractor telescope Printed with: 20% infill PLA+ no supports Thank you to the original maker.
Wyniki wyszukiwania: svbony
Liczymy pasujące modele…
P
Printables
WIFI telescope v 12 reduction for SVBONY spotting scope
The WIFI camera (model v12) doesn't hold well on the original rubber ring. I created a reduction ring that holds everything firmly in place after removing the rubber ring. I use it with the SVBONY MC25-75x70 scope.
P
Printables
Svbony sv165 - Sigma 150-600c holder
Ring mount for a guide scope; I recommend gluing a thin rubber layer inside to prevent slipping/rotation.
P
Printables
Svbony MK105 Modular Accessory System
This is a modular accessory system designed specifically for the Svbony MK105 Maksutov telescope. The system is built around a base mount installed on the telescope tube, with interchangeable threaded accessories. 1 Base Mount (Core…
P
Printables
Tiny 52mm Filter Adapter for Svbony SV535 (M52x0.75)
This tiny adapter slides onto the smooth moving front section of the Svbony SV535 lens and adds a standard 52 mm filter thread (M52x0.75), allowing the use of common photographic filters. The design is intentionally low-profile and…
P
Printables
SVBONY SV535 Dust Cap
The SVBONY SV535 doesn't come with a dust cap for the lens when the dew shield is screwed on ready for use. If others also have their SV535 ready to go, they should find this useful SV535 Dew Shield v3-65mm - Has an extra 2mm diameter…
P
Printables
Lens Cover/Cap for SVBONY SV165 Mini Guide Scope
Replacement lens cover/cap for SVBONY SV165 Mini Guide Scope for when you inevitably misplace the original. Recommend printing with TPU. DISCLOSURE: I get commissions for purchases made through links in this post.
P
Printables
Laser Collimator Alignment Tool (SVBONY SV121)
I wanted to check the alignment/collimation on my Svbony SV121 Laser Collimator, but other existing tools didn't work as it has 2 different diameters to the front an rear of the housing so I designed my own alignment jig for it. Uses 4 x…
P
Printables
Svbony SV705C Cable Holder
I found that the USB cable on the SV705C is very loose, so it disconnects easily when the telescope slews. So I made this to provide a bit of stablity to the cable. This is friction fit, as in VERY friction fit. It's not coming off any…
P
Printables
Adapter Svbony SV460 Spotting scope / Svbony SC001 cam
Adaptateur permettant d'utiliser la caméra Svbony Sc001 avec la lunette Svbony SV460. --- Adapter allowing the Svbony SC001 Wifi Camera to be ajusted in the spotting scope Svbony SV460. Filament : TPU / Flex (ideal) Infil : doesn't matter…
P
Printables
SVBony Red Dot Mount
A mount to attach a rail mounted red dot sight to your SVBony SV503 (and similar) telescope. Prints without supports. Created using Uzzors2k's Red Dot mount for Celestron Travel Scope ( https://www.thingiverse.com/thing:2731878 ) as the…
P
Printables
Svbony 503 80ED Bahtinov Mask
I have just reposted this from Thingiverse. This is a Bahtinov mask for the Svbony 503 80ED refractor telescope Printed with: 20% infill PLA+ no supports Thank you to the original maker.
P
Printables
Bahtinov Mask for Svbony SV555
A Bahtinov mask to fit over the Svbony sv555 telescope dew shield. It has a low factor with relatively wide spacing to make it easy to print.
P
Printables
Magnetic filter holder box for svbony telescope filter drawer (SV226)
The svbony SV226 filter drawer comes with two holders, but you may need to use more, so I designed this magnetic modular box. Print as many modules as you need. You need one “spacer” and two “plates” parts per module. I choose a 2…
P
Printables
Svbony SV503 80ED Solar Filter holder
This is a holder/frame for a Baader Solar Film filter, that will fit a Svbony SV803 80ED Telescope. It comes complete with the clips that will hold the retainer and bracket togeter. Printed with: 15% infill 0.4mm layer height PLA+ No…
P
Printables
Solar filter bracket for Svbony SV47 8x42 Binoculars
These rings/retainers allow a Baader solar film to be used with the Svbony SV47 8x42 binoculars Printed with: 15% infill PLA+ 0.4mm layer height no supports required You can just cut the Baader film accordingly and jam between the two…
P
Printables
114mm Travel Telescope Adapter for SVBony SV181
114mm Travel Telescope: https://www.printables.com/model/1038495-travel-telescope-114mm-updated-version/ Hardware required: 4x M4 heated inserts to be inserted via the back of the model (where the champers are). I believe I used 4mm…
P
Printables
Gridfinity Svbony telescope astrocam holder
2x2 gridfinity holder for a svbony SV105 telescope astrocam.
P
Printables
Svbony SV241 powerbox finder foot
A finder foot for the Svbony SV241 Powerbox, allowing you to attached to a finder shoe on your telescope. I used two M4 10mm button head screws to attach to the Powerbox.
P
Printables
Support for Mele miniPC and SVBony Power Box SV241
I remixed a Mele miniPC holder to add a support bracket for the new SVBony SV241 mini power box and USB hub. The holder can be mounted on any Vixen/Losmandy/flat bar with 2 M6 holes spaced 20 mm. The Mele miniPC is inserted in the slots…
P
Printables
Gl iNet Opal Router mount for SVBony SV Scope
Designed to mount my opal router directly to my SV503ED70 it should fit other SV and possibly other scopes as it utilizes the M4 20mm spaced holes normally used to mount a finder shoe. The base is designed to fit snugly around the 75mm…
P
Printables
Svbony 226 filter box, with dummy drawer
Remixable step, sorry but I dont like others box, it take less time to print dont waste aditional material, and also you can remix it.
P
Printables
SVBONY SV241 Cable Management
Snug fit printed flat on a Prusa Mini on 0.2mm speed profile PETG - 100% infill about 30-35min print time. EDIT: I have added a tall version of the Cable Management. I have not tested it, print at own risk.
P
Printables
Skywatcher tripod mount adapter with screw holes for SVBONY SV241 hub
Same printing instructions as the original. No supports needed, print vertically for best strength.
P
Printables
Svbony SV705C Cable Comb + Fan Mount
This is a versy specific model as it was made to fit an SV705C astro camera that doesn't come with a fan by default. The mount provides special clamping points to mount a special fan onto it while also providing a cable comb for cable…
P
Printables
SVBony SV241 Power Hub
A 3D Model of the SV241 Power Hub by SVBony. I took all measures manually, accuracy is not granted.
P
Printables
(SVBONY, ASIAIR, ONSTEP etc.) Vixen rail accessory clamp, 20 mm M4 pattern
What it is A compact two‑point vise for Vixen dovetail rails. Top face has 2× M4 holes at 20 mm spacing for small boxes and controllers. It clamps. Tested on Omegon ProRC 6" Carbon with doubled stock Vixen rail (up&bottom). Should fit…
P
Printables
SVBONY SV241 PRO Cable Management (ASCOM)
Snug fit printed flat on a Prusa Mini on 0.2mm speed profile PETG - 100% infill about 60-70min print time. EDIT: I have added a tall version of the Cable Management. I have not tested it, print at own risk.
P
Printables
WIFI telescope v 12 reduction for SVBONY spotting scope
The WIFI camera (model v12) doesn't hold well on the original rubber ring. I created a reduction ring that holds everything firmly in place after removing the rubber ring. I use it with the SVBONY MC25-75x70 scope.
P
Printables
Vixen-Compatible Mounting Plate for Raspberry Pi 4B Case and SVBONY SV241 Astronomy DC+USB Hub
This is a Vixen-compatible mounting plate designed for astrophotography setups. It allows you to securely mount both a Raspberry Pi 4B (in a case) and the SVBONY SV241 Astronomy DC+USB Hub Box on a telescope using a standard Vixen…
P
Printables
Svbony sv165 - Sigma 150-600c holder
Ring mount for a guide scope; I recommend gluing a thin rubber layer inside to prevent slipping/rotation.
P
Printables
SVBONY SV165 Mini Guide Scope C5 Adapter
A simple adapter to mount the SVBONY SV165 Mini Guide Scope on the Celestron C5. The advantage is that the centre of gravity is closer to the centre.
P
Printables
Svbony Imager To Konus Microscope Adaptor
The Konus Crystal-45 trinocular microscope's camera port does not fit the Svbony SV105 or SV205 imager. This adaptor is a press-fit for the Svbony housing and uses the existing fixing screw to keep the imager and adaptor in place. There…
P
Printables
Dovetail to arcaswiss adapter for mk90 Svbony telescope
I created this design with the idea of preventing the Arcaswiss plate from rotating on the Dovetai base, thus ensuring that the telescope's orientation is always the same each time it is mounted on the tripod using an Arcaswiss base.
P
Printables
Svbony Sv555 V2 lens cover
Lens cover for svbony sv555. lightweight and prits in 40 minutes
P
Printables
Mele miniPC + SVBony power hub Bracket for 30mm tripod center column
Mele Mini PC + SVBony Power Hub Bracket For 30 mm tripod center column with removable end cap (required for installation) Compatible with photographic tripods that have a 30 mm diameter center column . Secures a Mele Mini PC and SVBony…
P
Printables
Svbony MK105 Modular Accessory System
This is a modular accessory system designed specifically for the Svbony MK105 Maksutov telescope. The system is built around a base mount installed on the telescope tube, with interchangeable threaded accessories. 1 Base Mount (Core…
P
Printables
Tiny 52mm Filter Adapter for Svbony SV535 (M52x0.75)
This tiny adapter slides onto the smooth moving front section of the Svbony SV535 lens and adds a standard 52 mm filter thread (M52x0.75), allowing the use of common photographic filters. The design is intentionally low-profile and…
P
Printables
SvBony Sv241 and Mele Quieter 4 finder bracket
A bracket to attach a SvBony 241 power box and Mele Quieter 4 PC to a finder shoe on your telescope. Print upside down and no supports are needed. In addition I used: 2 x M4 10mm screws to attach to the Power box 2 x M3 8mm screws to…
P
Printables
SVBONY SV535 Dust Cap
The SVBONY SV535 doesn't come with a dust cap for the lens when the dew shield is screwed on ready for use. If others also have their SV535 ready to go, they should find this useful SV535 Dew Shield v3-65mm - Has an extra 2mm diameter…
P
Printables
SVBONY Wire Management
The original model blocked USB and power ports, so I modified it to use the lid screws to hold the pieces on. You'll need four M2.5 x 6mm screws (preferably countersunk).
P
Printables
Dew Shield and Tri-Bahtinov Mask for SVBony MK127 Telescope
The Tri-Bahtinov mask was designed using this excellent tool: https://skeye.rocks/tools/mask/ The mask and dew shield are designed to be a snug pressure fit onto the lens cap flange by adding a couple strips of adhesive velvet as sold for…
P
Printables
Cable Manager for SVBONY Telescope
I needed a solution for all my draping cables attached to my budget SVBONY Astrophotography rig. Rather than buying shorter cables of unsure lengths depending on slew direction and going crazy with velcro, I decided on designing this…
P
Printables
SVBony 10mm 62' 32mm focuser adapter
To mount the adapter, simply unscrew the SVBony in half, replace the golden ring with the printed adapter, and screw it back together. Enjoy using it on old telescopes! Tape unnecessary ;)
P
Printables
Bahtinov Mask SVBony 90mm
Disclaimer - This is a proof of concept digital design only. This digital design is for learning purposes only. This digital design is not for production. Bahtinov Mask SVBony 90mm Category: Physics & Astronomy
P
Printables
Parfocal ring for goldline / svbony telescope eyepiece
For my eyepieces I had to use the following spacer to reach parfocal: 20mm - None 15mm - Use 1.8mm spacer 9mm - Use 2.0 6mm - Use 2.2 I suggest printing all the sizes and take it with you on a clear night to test out. Takes a bit of trial…
P
Printables
SVbony SV165 Dew Shield
After a having a problem with my guiding due to dew, I decided I need a solution fast. I could save the night with an empty toilet paper roll 😅, but a more permanent solution was needed. This is a custom dew shield for the SV165 Mini…
P
Printables
Dew shield SV165 Svbony telescope
Request by an amatorial astronomic photographer “Andrea Anghileri” This is a dew shield for a guide telescope by Svbony model SV165 3omm f4 The project is composed by 4 pieces: dew shield with rapid joint lens cover with rapid joint part…
P
Printables
Manual Filter wheel (eg. SVBony SV133) light leak blocker
The SV133 is a low cost manual filter wheel that suffers from some unfortunate light leaks through the control wheel. Other brands (eg. Astromania) also offer nearly identical models that would probably fit as well. This cover goes over…
P
Printables
Svbony Medium Dovetail Clamp Thumbscrew handle for better grip
The Svbony Dovetail Clamp is a top quality accessory for telescopes, but sometimes it is difficult to reliably fasten heavier loads. This thumbscrew handle gives you a better grip. The loose version is easily removable, and the tight…
P
Printables
Bahtinov mask for Svbony 60mm 60/240 guide scope
Bahtinov mask for the Svbony 60/240mm guide scope. Splitable Bahtinov Mask Generator by Ryoko .scad file customzied in SCAD. Wall thickness is 3mm. Not a snug fit to avoid problems with shrinking on cold nights. Print Settings Printer…
P
Printables
Vixen-style dovetail bar for (Svbony / Orion) Guide Scope
Standard Vixen-stlye dovetail, with holes for Svbony / Orion Guide Scope rings, and Svbony dovetail clamp. Versions: The 90mm version is the same length as the original finder-dovetail. The 120mm adds a bit extra length for balancing.…
P
Printables
SvBony 50mm guidescope dew shield
Suggest 60+% innfil to make it structurally sound. Rafts are reccomended.
P
Printables
Svbony Right Angle Finder Scope Mount for Hadley
Just a simple mount for the "cheap" Svbony right-angled finder scope for my metric Hadley Its a very tight fit, you may need to up scale it by 1%-2% unless you have a particularly well-tuned printer.
P
Printables
SVBONY 105mm Maksutov-Cassegrain Solar Filter Adapter
This adapts the popular 4.58in or 100mm solar filters to the SVBONY Maksutov-Cassegrain of the 105mm size. I printed this from ASA with some shrinkage in mind so if you print with PLA or PETG might want to shrink it by 0.5% There is a…
P
Printables
SVBONY Camera rotator shim ring 105 Mak
This ring is a simple one perimeter print. I used asa and cut the ring to get it to drop into the rotator threads. This prevents your camera or eyepiece from moving around and getting off center. I recommend printing this with a brim.
P
Printables
SVBONY 122mm APO Calibration cap and lens cap
This is a two part model. The handle click locks as you rotate it. The center has a 5mm hole with you can put some transparent tap for checking the coloration of your focuser. I printed this with Black ASA so other print materials might…
P
Printables
SvBony SV165 Dew Shield and Cap
This is a dew shield for the SvBony SV165 30mm mini guide scope. There is also a cap included to print due to the size of the shield being bigger than the orginal one.
P
Printables
Svbony SV226 Box
El portafiltros SVbony SV226 viene con dos portafiltros y necesitaba guardarlos de la manera más eficiente en mi caja para un uso lo más comodo y rápido posible. Tambien he preparado dos versiones de tapas para cuando no quiero usar…
P
Printables
Mele Overclock 4C SVBony Medium Clamp Mount
A mount to attach the Overclock 4C to the dovetail clamp using screws. Parts I used: https://www.amazon.com/SVBONY-Medium-Dovetail-Telescopes-Cameras/dp/B08TC3W79Z…
P
Printables
Svbony Sv211 Comfort Grip
I really like the Sv211 dual use as a handle and a place to mount my ASIAir + Guide scope. Though I found it a little uncomfortable as two edges dig in when you are holding it. This fits under the rail and is held in by one screen on the…
P
Printables
Lens Cover/Cap for SVBONY SV165 Mini Guide Scope
Replacement lens cover/cap for SVBONY SV165 Mini Guide Scope for when you inevitably misplace the original. Recommend printing with TPU. DISCLOSURE: I get commissions for purchases made through links in this post.
P
Printables
Bahtinov Mask for SVBONY SV165
Status: V1 does not work very well, V2 works better but is a flange type. The lines are quite small, printer precision will be beneficial and a nozzle smaller than 0.4mm would likely help, untested. V1 ID: 48.5mm Print flat side down, any…
P
Printables
Svbony SV503 NEEWER Guiding Scope Mount Adapter
Made this adapter to attach the NEEWER guiding scope mount ( Amazon Germany ) to the tube holders of my Svbony SV503 80ED (should work for the other variants) instead of the rotating end of it. Makes cable management a bit easier, as well…