114mm Travel Telescope Adapter for SVBony SV181
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple model used to adapt the SV181 to Ander's 114mm Travel Telescope
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
114mm Travel Telescope:
https://www.printables.com/model/1038495-travel-telescope-114mm-updated-version/
Hardware required:
4x M4 heated inserts to be inserted via the back of the model (where the champers are). I believe I used 4mm inserts, however any should work.
Clean the insert hole by using a 2mm drill to clear out any additional melted plastic which might be in the way.
To insert the bottom screws from the SV181 into the adapter I suggest you momentarily take off the SV181's focus adjuster to allow for easiy installation, then put it back on.
Additional note: Unless Ander has updated the secondaryholder part, you will need to make the “keyhole” square on the bottom of the focuser mount location. This will allow the teeth of the SV181 to fit in the secondary holder.
