1 / 2
Magnetic filter holder box for svbony telescope filter drawer (SV226) — zdjęcie 1
1 / 2

Magnetic filter holder box for svbony telescope filter drawer (SV226)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A modular box to store your filter holders, designed for the svbony SV226 filter drawer

Ocena
0 / 5
Polubienia
10
Pobrania
108
Wydruki
0
Wyświetlenia
650
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The svbony SV226 filter drawer comes with two holders, but you may need to use more, so I designed this magnetic modular box.

Print as many modules as you need. You need one “spacer” and two “plates” parts per module.

I choose a 2 componants design over a single “print in place with no support” one, because the finish is better.

You will need eigth 4x2mm magnets per module : 2 for the filter holder retention, and 3 to 6 optional for modules assembly.

 

Printer requirements are basics : PLA with 0.2 layer height is fine. I used PETG because I find it easier to glue with the glue I use for miniatures, and just because it was the only red filament available in my stock ;)

If you enjoy this model, please like and leave a comment ;)

Tagi