Magnetic filter holder box for svbony telescope filter drawer (SV226)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular box to store your filter holders, designed for the svbony SV226 filter drawer
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 109
- Makes
- 0
- Views
- 659
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The svbony SV226 filter drawer comes with two holders, but you may need to use more, so I designed this magnetic modular box.
Print as many modules as you need. You need one “spacer” and two “plates” parts per module.
I choose a 2 componants design over a single “print in place with no support” one, because the finish is better.
You will need eigth 4x2mm magnets per module : 2 for the filter holder retention, and 3 to 6 optional for modules assembly.
Printer requirements are basics : PLA with 0.2 layer height is fine. I used PETG because I find it easier to glue with the glue I use for miniatures, and just because it was the only red filament available in my stock ;)
If you enjoy this model, please like and leave a comment ;)