1 / 1
Sealant Nozzle — zdjęcie 1

Sealant Nozzle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sometimes you need something long and thin to get sealant deep into a gap where the standard nozzle is not suitable. Thi

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

I have a poorly fitted window and water was getting in underneath and causing damp inside the bathroom wall. The gap was found but I couldnt fit a standard tapered nozzle deep enough under the window so made this.

It is best printed in PETG structural or a semi rigid TPU might be more durable, although this is more than good enough for my requirements. 

A brim is a good idea due to the tall shape and small base.

100mm is good enough to get sealant around most windows.

Takes just a little over 1 hr on a core one 0.2mm structural 0.4mm nozzle. I used 100% infill since there is a tiny amount where it is needed so dosent really make any difference to the printing time.

I wouldnt try flexing too much as 3d prints can crack along layer lines but due to the structural setting and general geomitary and size, the print head moves quite slow around the nozzle giving a good amount of heat into the material so it should be a strong print.

2.54m of filament used so good for using up left over reels.

Hope it's useful to someone else.

Tagi