1 / 2
Badger 2350 Door Status Sign - "In a meeting / Do not disturb" — zdjęcie 1
1 / 2

Badger 2350 Door Status Sign - "In a meeting / Do not disturb"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slim e-paper door sign for Pimoroni Badger 2350: "In a meeting", "Busy", "Free" or "Sleeping" with one button press.

Ocena
0 / 5
Polubienia
3
Pobrania
1
Wydruki
0
Wyświetlenia
152
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

Working from home? Kids, partner or flatmates knocking in the middle of a video call? This is a small, clean door sign built around the Pimoroni Badger 2350.

The e-paper screen keeps the last message on screen without using power, so the sign can stay on the door all day. Each button shows a status: busy, free, in a meeting, sleeping or your own custom text (for example "Back at 11:30").

Features

  • Houses the bare Badger 2350 board (no official case needed), with room for the LiPo battery

  • Window sized to the 2. e-paper display

  • 5 press-fit button caps with embossed icons (no entry, check, pencil, clock, moon)

  • Flat back with two recesses for 80 x 19 mm double-sided tape: no holes in the door

  • Top-edge opening for USB-C charging and the HOME / RESET buttons

  • Rounded, soft shape, 102 x 88 x 19.8 mm

Parts

  • front_frame.stl (or front_frame_base.stl + front_frame_lip.stl for two separate colours)

  • back_cover.stl

  • button_caps.stl

  • door_sign.scad (editable OpenSCAD source)

Printing (single extruder, no AMS needed)

  • PLA, 0.2 mm layers, 3 walls, 15% infill, no supports

  • Front frame: print face up. Colour change at Z = 3.2 mm (after layer 16): sage green base, warm white lip and icons

  • About 63 g of filament and 2.5-3.5 h in total

Assembly

  1. Place the Badger 2350 face down into the front frame, A/B/C buttons at the bottom.

  2. Press the button caps in from the front.

  3. Snap the back cover on.

  4. Stick two strips of double-sided tape in the back recesses and press it onto the door.

Program the messages in MicroPython with any editor (for example Thonny) by changing the text shown for each button.

If you like it, a like or a boost helps a lot. Thank you!

Tagi