1 / 3
64mm slotted corrugated cable holder cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a cap for a with a 10mm x 35mm slot to get a few cables through but mostly keep the dirt out
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
You should be able to use some sealant and get this nice and snug, but it is designed to be removable. This will clip onto the cable sheath but can be pulled off without too much effort. I can try to make variations upon request and add them to this page