FixHub Power Station Belt Holster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carry the FixHub Power Station on your belt, with the Smart Soldering Iron clipped on the side.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This slides over the back half of the FixHub Power Station so you can wear it on your belt. It has a copy of the station's tool mount low on each side, so the Smart Soldering Iron clips on the same way it does on the station and hangs alongside it, cable end up.
The belt goes through two keepers on the kickstand side, so the screen faces towards the belt loops. It takes belts up to 45 mm wide.
Print it standing on its back end with no supports. The STL is already oriented that way, and the STEP file is there if you want to remix it.