Mooer GWF4 footswitch holder for HSW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical cup for the Mooer GWF4 wireless footswitch, switch face out, 2 pegs, no supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 0
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Holds the Mooer GWF4 wireless footswitch (224 x 40 x 26 mm body) standing on its short end, switch face out.
Cup inside 40.8 x 26.8 x 45 mm (0.4 mm gap per side), back plate 4 mm, walls 2.5 mm, floor 3 mm with a window.
The front U-slot clears the lowest footswitch, so it isn't pressed; the side parts of the front wall stop the device tipping forward.
2 hex pegs in one column: the bottom one flat on the bed, the top one with a 45 degree ramp underneath.
Not print-tested yet.
Printing: upright, back plate vertical, pegs horizontal, as the files are oriented. No supports. Layer 0.2 mm, 3-4 perimeters, 20% infill, PETG or PLA.
Designed for the standard Honeycomb Storage Wall panel by RostaP. Files: STL, 3MF and STEP.