Brilliant Labs Frame + Mr. Power holder for HSW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small bracket that holds Frame AI glasses standing on the Mr. Power charger, lenses to the wall.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 0
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Holds Brilliant Labs Frame glasses standing on their Mr. Power charging nose: lenses 3 mm off the back plate, temples folded, so you can charge them right on the wall.
The seat pocket follows Mr. Power's shape (+0.4 mm) and is 7 mm deep; the USB-C slot is open to the front.
The pocket has no undercuts, the glasses lift straight out.
Back plate 62 x 4 x 22 mm, about 11 cm3 of plastic.
2 insert-style pegs in one row, flat on the bed.
Not print-tested yet.
Printing: upright, back plate vertical, pegs horizontal, as the files are oriented. No supports. Layer 0.2 mm, 3-4 perimeters, 20% infill, PETG or PLA.
Designed for the standard Honeycomb Storage Wall panel by RostaP. Shaped from the official Frame hardware models. Files: STL, 3MF and STEP.