Stealth Press soldering iron plug mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount to hold soldering iron plug in place on the Stealth Press
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A model I made for the Stealth press (https://www.printables.com/model/1081157-stealth-press-1s-heat-set-insert-press) after I found that the transport handle was great, but the plug dangling around while transporting it was not. Uses the same screws (M3x8) that the kit uses, to attach to the unused side where the cable strain relief normally fits.
I have 3 versions of this: UK plug, Europe plug and USA plug.
This model fits on the left side as you look at the Stealth Press, but you can mirror the part to suit fitting on the right side.
I printed these with a 0.4 nozzle, 3 walls and 10% infill.