Stealth Press soldering iron plug mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount to hold soldering iron plug in place on the Stealth Press
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
A model I made for the Stealth press (https://www.printables.com/model/1081157-stealth-press-1s-heat-set-insert-press) after I found that the transport handle was great, but the plug dangling around while transporting it was not. Uses the same screws (M3x8) that the kit uses, to attach to the unused side where the cable strain relief normally fits.
I have 3 versions of this: UK plug, Europe plug and USA plug.
This model fits on the left side as you look at the Stealth Press, but you can mirror the part to suit fitting on the right side.
I printed these with a 0.4 nozzle, 3 walls and 10% infill.