1 / 1
3/4" BSP to GHT (Garden Hose Thread) No supports — zdjęcie 1

3/4" BSP to GHT (Garden Hose Thread) No supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Connects 3/4" BSP to GHT, and prints without supports

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Despite the description saying otherwise, I couldn't see a way up I could orient the original part to print it without supports. To make it so I could, I eliminated all the overhangs greater than 45° (except the ones on the threads themselves, which are non-negotiable, and I knew I'd been able to print in the past).

Print Settings

Printer Brand:

Geeetech

Printer:

Geeetech I3ProW

Rafts:

No

Supports:

No

Resolution:

0.1mm layers

Infill:

25%, but less would probably have been fine

Filament: Geeetech PLA Grey

Notes:

I printed the female GHT side at the top and the male BSP side at the bottom so the flat surface that a washer/o-ring presses against would be a top surface that could be ironed and seal with no post-processing instead of a bottom that would need supports and then lots of sanding and filling to get a good seal.

Post-Printing

Literally just put an o-ring/washer in the female GHT side.

Category: Outdoor & Garden

Tagi