3/4" BSP to GHT (Garden Hose Thread) No supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connects 3/4" BSP to GHT, and prints without supports
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Despite the description saying otherwise, I couldn't see a way up I could orient the original part to print it without supports. To make it so I could, I eliminated all the overhangs greater than 45° (except the ones on the threads themselves, which are non-negotiable, and I knew I'd been able to print in the past).
Print Settings
Printer Brand:
Geeetech
Printer:
Geeetech I3ProW
Rafts:
No
Supports:
No
Resolution:
0.1mm layers
Infill:
25%, but less would probably have been fine
Notes:
I printed the female GHT side at the top and the male BSP side at the bottom so the flat surface that a washer/o-ring presses against would be a top surface that could be ironed and seal with no post-processing instead of a bottom that would need supports and then lots of sanding and filling to get a good seal.
Post-Printing
Literally just put an o-ring/washer in the female GHT side.
Category: Outdoor & Garden