1 / 5
Geeetech i3 Air Duct Fan Housing with cutout for i3 Pro W — zdjęcie 1
1 / 5

Geeetech i3 Air Duct Fan Housing with cutout for i3 Pro W

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cooling fan duct for Geeetech i3 Pro W

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
7
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Now I know more about 3D printing, I'm less confident that this is better than the alternatives I rejected.

Based on the AirDuctV6RHvs.stl variant of the original design.

That part fit the i3 Pro W fine, except for part of the outlet needed to go where a bolt head attaching the X carriage to its bearing is. This remix has a small dent to make space for that bolt.

I also had to change the dimensions of the intake by about a millimetre to better fit my (potentially knockoff) Sunon fan from AliExpress.

Print Settings

Printer:

Geeetech Alkaid

Rafts:

No

Supports:

Yes

Resolution:

0.05mm layers

Infill:

100%

Filament: Suluu ABS-like resin Clear Blue

Notes:

I printed this on my Geeetech Alkaid rather than on the i3 Pro W as I'd read that photopolymer resin has better heat resistance than PLA.

I printed directly on the bed as I've got my settings pretty well dialled in for that, but accidentally left a bunch of support skates touching the part, so needed some pretty extensive dremmelling to make the part usable. Don't do that - it's probably no good for you to risk spreading only-mostly-cured resin dust around, especially if you've not yet invested in a 405nm flashlight and safety goggles.

How I Designed This

I basically just used boolean modifiers in Blender. I've attached the .blend file in case anyone needs to do further meddling.

Category: 3D Printer Parts

Tagi