Geeetech i3 Air Duct Fan Housing with cutout for i3 Pro W
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cooling fan duct for Geeetech i3 Pro W
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 7
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Now I know more about 3D printing, I'm less confident that this is better than the alternatives I rejected.
Based on the AirDuctV6RHvs.stl variant of the original design.
That part fit the i3 Pro W fine, except for part of the outlet needed to go where a bolt head attaching the X carriage to its bearing is. This remix has a small dent to make space for that bolt.
I also had to change the dimensions of the intake by about a millimetre to better fit my (potentially knockoff) Sunon fan from AliExpress.
Print Settings
Printer:
Geeetech Alkaid
Rafts:
No
Supports:
Yes
Resolution:
0.05mm layers
Infill:
100%
Filament: Suluu ABS-like resin Clear Blue
Notes:
I printed this on my Geeetech Alkaid rather than on the i3 Pro W as I'd read that photopolymer resin has better heat resistance than PLA.
I printed directly on the bed as I've got my settings pretty well dialled in for that, but accidentally left a bunch of support skates touching the part, so needed some pretty extensive dremmelling to make the part usable. Don't do that - it's probably no good for you to risk spreading only-mostly-cured resin dust around, especially if you've not yet invested in a 405nm flashlight and safety goggles.
How I Designed This
I basically just used boolean modifiers in Blender. I've attached the .blend file in case anyone needs to do further meddling.
Category: 3D Printer Parts