1 / 3
Sir Croaks-a-Lot – The Frog Knight
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cute 3D printable frog knight miniature tested on Ender 3 V2
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Meet Sir Croaks-a-Lot, a brave little frog knight ready for adventure!
Scaled and tested on Ender 3 V2 with clean geometry and a flat base for easy bed adhesion.
Layer height: 0.20 mm (or 0.16 mm for higher detail)
Supports: Tree / Organic supports enabled (bed only)
Infill: 10–15%
Printed cleanly in PLA.
