These beer tap handles are not too shabby.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stubby style knob for your tap handle. I have my knob mounted on a chrome angled tap handle adapter for a…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a stubby style knob for your tap handle. I have my knob mounted on a chrome angled tap handle adapter for a bit of extra height. The shorter design is great if you have a keezer or limited height above your taps.
This design has an integrated 3/8"-16 thread that is a standard tap handle fitting. The threaded insert file is available here. http://www.thingiverse.com/thing:1466850
Print Settings
Printer Brand:
MakerGear
Printer:
M2
Rafts:
No
Supports:
No
Resolution:
.20mm layers
Infill:
25-30%
Notes:
Should fit smoothly, but you may need to scale it a % or so to match your printer settings for a better fit.
I recommend .20mm layers minimum and to slow down your printer to 50mm/sec or so to get a really smooth print.
3 perimeters and 30% fill make it plenty strong for home use.
Category: Hobby