1 / 2
Gyroid Christmas Bauble – Generative Lattice Ornament (70 mm) — zdjęcie 1
1 / 2

Gyroid Christmas Bauble – Generative Lattice Ornament (70 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 70 mm openwork Christmas bauble grown from a gyroid minimal surface. Hangs on the tree, prints in one piece.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A Christmas bauble that looks grown rather than designed. The shell is a gyroid – a triply periodic minimal surface found in butterfly wings and modern 3D-printed lattices – trimmed to a 70 mm sphere. The lattice gets slightly finer towards the top, so light passes through it differently from every angle.

Generated algorithmically by Revo3D (signed distance fields + marching cubes), checked watertight and printable.

PRINT SETTINGS

  • Size: Ø70 mm, height ~80 mm with the loop

  • - Nozzle 0.4 mm, layer 0.16–0.2 mm

  • - Print upright on the small flat foot, tree supports only under the loop (or none – most printers bridge it)

  • - 2–3 walls, infill irrelevant (the wall is the lattice)

  • - Material: PLA, silk PLA or PETG. Always follow your filament manufacturer's recommended temperatures first.

  • - Time: about 3–4 h on a typical printer

Hang it with a thin gold thread or a classic ornament hook.

Part of the Revo3D generative Christmas collection – baubles, lanterns for IKEA tealights, figurines and large sculptures for big printers. Made by Revo3D, builders of large-format Revon 3D printers (revo3d.pl/en).

Tagi