Gyroid Christmas Bauble – Generative Lattice Ornament (70 mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 70 mm openwork Christmas bauble grown from a gyroid minimal surface. Hangs on the tree, prints in one piece.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 3
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
A Christmas bauble that looks grown rather than designed. The shell is a gyroid – a triply periodic minimal surface found in butterfly wings and modern 3D-printed lattices – trimmed to a 70 mm sphere. The lattice gets slightly finer towards the top, so light passes through it differently from every angle.
Generated algorithmically by Revo3D (signed distance fields + marching cubes), checked watertight and printable.
PRINT SETTINGS
Size: Ø70 mm, height ~80 mm with the loop
- Nozzle 0.4 mm, layer 0.16–0.2 mm
- Print upright on the small flat foot, tree supports only under the loop (or none – most printers bridge it)
- 2–3 walls, infill irrelevant (the wall is the lattice)
- Material: PLA, silk PLA or PETG. Always follow your filament manufacturer's recommended temperatures first.
- Time: about 3–4 h on a typical printer
Hang it with a thin gold thread or a classic ornament hook.
Part of the Revo3D generative Christmas collection – baubles, lanterns for IKEA tealights, figurines and large sculptures for big printers. Made by Revo3D, builders of large-format Revon 3D printers (revo3d.pl/en).