Search results: gyroid

Gyroid Lattice Structure 35% Infill Plated

Gyroid Lattice Structure. Added solid platforms. Ready to print, no support needed.

Desk organizer gyroid

Minimalist Gyroid Desk Organizer A sleek and compact cylindrical desk organizer designed to keep everyday essentials tidy while adding a subtle geometric touch. The internal structure is based on a gyroid geometry , creating organic…

Bowl with spherical gyroid pattern

Bowl/Dish with cylindrical/spherical gyroid pattern

Gyroid TROPHY

When I saw the competition I was immediately inspired by the gyroid infill that was discovered by a NASA scientist in 1970. The gyroid surface can be trigonometrically approximated by a short equation: sin x . cos y + sin y . cos x + sin…

Gyroid Pot

This model is an experiment in using Triply Periodical Minimal Surfaces (TPMS) in models, in this case I have used gyroids as an outer decoration to a pot. This is somewhat hard to print using FDM - the above model was printed without…

Ipad stand gyroid lattice

Fit tablets with max thickness of 7mm (Ex: Pro 2018, Air 2020, M4 2024) Print at slower speeds to increase quality. Note: The top/bottom cover is optional. The top anti-slip cover reduces the max thickness to around 5mm.

Gyroid Switch Game Holder

Storage for your switch games! What could be better than a gyroid to hold all those other games you have while you're playing animal crossing? An insert in the bottom of Lloyd here holds a baker's dozen game cartridges and keeps them…

Tockoid - Gyroid from Animal Crossing New Horizons

TOCKOID ⚱ Gyroid from Animal Crossing New Horizons ⚱ This model is based on one of the gyroids you can find in Animal Crossing New Horizons. They are so fun to collect ingame, so why not collect them in real life too? Multicolor &…

Magnetic Gyroid Connector

A connector to make the gyroid. https://en.wikipedia.org/wiki/Gyroid I super glued 3 diameter, 1 depth magnets into the holes to make a construction set. I printed with brim and supports.

Babbloid - Gyroid from Animal Crossing

BABBLOID ⚱ Gyroid from Animal Crossing New Horizons ⚱ My second model of the gyroids from Animal Crossing New Horizons is here! They are so fun to collect ingame, so why not collect them in real life too? Multicolor & Singlecolor 3mf…

head(amame) v2 Gyroid TPMS Lattice Cones

TPMS Gyroid open-back cones for the head(amame) v2 3D printed headphone kit . I designed these cones to be compatible with single extruder, dual extruder, and multi-material 3D printers like the Bambu X1-Carbon. Each part is available in…

head(amame) v2 Gyroid TPMS Lattice Cone WITH MICROPHONE

Dirty modification of Andrew Sink's Head(amame) cones to include the microphone jack

Gyroid

Gyroid Cube 50x50x50

This is a remix . Its based on https://www.thingiverse.com/thing:757884/files. Its 50x50x50 (and not 80x80x80 as the original). I have cut a couple of milimeters on the base of the original model in order to increase the surface touching…

Pen Holder Gyroid ASYM - Stifthalter Gyroid ASYM

Pen Holder Gyroid ASYM Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Stifthalter Gyroid ASYM Stl-Dateien (ohne Konfiguration) 3mf-Dateien (mit Konfiguration) für…

Pen Holder Gyroid Triangle - Stifthalter Gyroid Dreieck

Pen Holder Gyroid Triangle Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Stifthalter Gyroid Dreieck Stl-Dateien (ohne Konfiguration) 3mf-Dateien (mit…

Gyroids (similar to AC) designed by my nephew

My (at the time) 6 year old nephew Alex absolutely loves Gyroids from Animal Crossing . So he decided to draw his own Gyroids and asked me to print them. And, well... I did. Since he liked the results and knows that I download 3D models…

Paperclip Holder Gyroid - Büroklammern Spender Gyroid

Paperclip Holder Gyroid Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Büroklammern Spender Gyroid Stl-Dateien (ohne Konfiguration) 3mf-Dateien (mit Konfiguration)…

Bubbloid - Gyroid from ACNH

BUBBLOID ⚱ Gyroid from Animal Crossing New Horizons ⚱ Finally!!! My third model of the gyroids from Animal Crossing New Horizons is here! They are so fun to collect ingame, so why not collect them in real life too? Have fun printing this…

GYROID lowpoly

This is thickened lowpoly GYROID surface. The cut is made so that no support is required. Printed model can be used as a pencil holder or simply as a decoration.

Pen Gyroid + Cubic with Holder - Kugelschreiber Gyroid + Kubisch mit Halter

Pen Gyroid + Cubic with Holder Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini (with and without colorchange) Printfiles (G-Code) for MK3S and Mini (with and without colorchange) Simply insert the…

Gyroid Easter Egg Decor

Super Easy & Fast to Print Easter Egg decoration! 150mm Tall Check out rest of my Easter decorations here Ready print Profiles for Bambu Printers on MakerWorld, link Below:…

Gyroid Easter Egg Decor

Super Easy & Fast to Print Easter Egg decoration! 150mm Tall Check out rest of my Easter decorations here Ready print Profiles for Bambu Printers on MakerWorld, link Below:…

Wyrmwood Dicepalooza Gyroid Dice Case

I designed this case to fit my Gyroid dice I got from the Dicepalooza Kickstarter by Wyrmwood. The case perfectly fits the dice, keeping them in place with the lid which is magnetically attached using 8 4x2mm magnets. There is a version…

Pen Holder POLYGON Gyroid + Cubic - Stifthalter POLYGON Gyroid + Kubisch

Pen Holder POLYGON Gyroid + Cubic (2 Diameter) Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Version 80 inside diameter (corner to corner): 82mm Version 100 inside…

Heart Bowl Gyroid - Herz Schüssel Gyroid

Heart Bowl Gyroid Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Have fun! Herz Schüssel Gyroid Stl-Dateien (ohne Konfiguration) 3mf-Dateien (mit Konfiguration) für…

Gyroid Plant Pot - Concrete Molds

These are concrete molds for a Gyroid from Animal Crossing . They're based on the following 3D model: https://www.thingiverse.com/thing:3442346 The final figure consists of three parts : the left arm, the right arm, and the body. The arms…

Squeakoid - Gyroid from ACNH

SQUEAKOID ⚱ Gyroid from Animal Crossing New Horizons ⚱ Say hi to the Squeakoid , the newest member of my growing gyroid fanart collection from Animal Crossing: New Horizons ! 🎵 He’s makes the most adorable squeaky sounds in-game. ✨ Fun…

Gyroid style pump cap for TITAN AIO Cooler

The pump cap for the TITAN AIO Cooler with a gyroid design and the Corsair logo. It is available in two different tilt angles for the infill pattern.

(Gyroid Remix) PolyDryer Desiccant Dryer Basket

The original one's holes were too big for the dessicant I have (and it took me an hour to print) so I pulled some slicer magic and made a 40% gyroid mesh instead, took 30 minutes and works great.

Gyroid Handlebar Grip

A gyroid-patterned handgrip for a standard 22.2mm handlebar. I like it. With no perimeters, the infill pattern makes it nice and grippy. Future Plans I intend to make some knife handles based on this design. This would be especially…

Polydryer Basket Remix with Lifting Handle and Gyroid Base for Dessicant

Model shown with 40% gyroid infill with zero top and bottom layers. The best way to use this.

Gyroid Switch Game Case

Animal crossing gyroid with game slots inside When printed my top was not 100% straight so I included a rotated top version that is in 2 parts. Mine was roughly 16 deg off. Note: first version had lid thread mirrored, should be fixed now…

Full Gyroid Pen Holder - triply periodic minimal surface

A gyroid TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Infill: 20 Filament: / PLA Category: Office

Ikea Frosta 3D Cushion ft. Gyroid Infill

Inspired by those insanely expensive 3D-printed lattice bike saddles, I decided my humble Ikea Frosta stool deserved the same futuristic comfort treatment. So… here’s a 3D-printed lattice cushion you can make yourself with some flex…

Gyroid Bambu Reusable Spool

I printed this out of PETG, just download the 3mf, and make your printer/filament changes. everything should be setup otherwise. You could use PLA if you don't intend to dry your filament past 45*C. This spool is pretty much the same…

Thick Gyroid

Gyroid with thick walls Print instructions Supports are required. Tree/Organic support is recommended

Gyroid Handle – Strong and Lightweight Door or Machine Grip

This handle has a gyroid structure that makes it strong but lightweight. It can be used on doors, drawers, machines, or enclosures. The model is designed to print without supports . After printing, use a knife or blade to cut through the…

Markup Brush + Toothbrush Holder Gyroid + Cubic - Makeuppinsel + Zahnbürstenhalter Gyroid + Kubisch

Makeup Brush + Toothbrush Holder Gyroid + Cubic Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Have fun! Makeuppinsel + Zahnbürstenhalter Gyroid + Kubisch…

bound gyroid ball

A ball filled with a gyroid lattice.

Gyroid Lattice Structure 35% Infill Plated

Gyroid Lattice Structure. Added solid platforms. Ready to print, no support needed.

Plant pot with gyroid drip tray

Plant pot with holes and a perfectly fitting drip tray. You can also scale it to get a custom-sized plant pot - mark matching size pot and drip tray (with modifier), and scale it as you want - remember to mark the “uniform scaling”…

SSurface to Gyroid Transition Cylinder

TPMS (triply periodic minimal surface) SSurface to Gyroid Transition structure Cylinder. 50X50X50mm Scale to size 0.2mm standard 0.4mm hardened steel nozzle Sunlu Orange Silk PLA+ printed on Bambu Lab A1 mini. Printed on Bambu Lab A1 mini.

Gyroid Bracelet

From the 2 stl files I created a merge. Place both stls on the bed selct them and right click merge. You have to position the infill.stl 4mm above the printbed (position coordinate Z). Set all perimeters of infill.stl to 0. You can play…

Gyroid Bauble Christmas Ornament Decoration - Type 1

Gyroid bauble Christmas tree ornament decoration. Hollow cavity to reduce print time and allow more light to pass through. Designed with Fusion & Hyperganic.

Gyroid Bauble Christmas Ornament Decoration - Type 2

Gyroid bauble Christmas tree ornament decoration. Hollow cavity to reduce print time and allow more light to pass through. Designed with Fusion & Hyperganic.

Gyroid TV remote box

I made this Gyroid look organizing box for TV remotes. Recommended 3D printer's settings: Material: PLA Resolution: 150um Infill: 15-30% Feel free to make your own Gyroid TV remote box! Print instructions Ready to print for i3 MK3/S gcode…

Gyroid Surface

This is a model of a Gyroid Surface. What's a Gyroid? https://en.wikipedia.org/wiki/Gyroid "A gyroid is an infinitely connected triply periodic minimal surface discovered by Alan Schoen in 1970." Glad we cleared that up. To put it another…

Gyroid Sphere -TPU

A simple shape with a surprisingly addictive feel. The TPU Gyroid Flex Ball is printed in TPU 90A , using a continuous gyroid lattice that delivers smooth, springy compression and satisfying rebound. The open geometry flexes evenly in…

Desk organizer gyroid

Minimalist Gyroid Desk Organizer A sleek and compact cylindrical desk organizer designed to keep everyday essentials tidy while adding a subtle geometric touch. The internal structure is based on a gyroid geometry , creating organic…

Gyroid Infill Lamp

This lamp exposes the gyroid infill that's normally hidden away inside the model's perimeters. Add an light to make it a lamp or use it as a decoration. Print instructions The two 3mf files contain the height range settings to expose 50mm…

Gyroid chunk boundary

This model is featured in figure 6.25 of Visualizing Mathematics with 3D Printing . Category: Math

Gyroid chunk

This model is featured in figures 6.23 and 6.24 of Visualizing Mathematics with 3D Printing . Category: Math

Bathsheba Grossman Gyroid Complex

Complex Bathsheba Grossman Gyroid

Gyroid Lattice Twisted Pen Holder

✨ Description This is a parametric pen holder featuring a gyroid lattice structure applied only to the side walls. The top and bottom surfaces are kept solid to maintain strength and usability, while the sides are transformed into a…

Gyroid

Slicer said “add supports”. It printed fine with no supports. 😉

Gyroid Sphere

I used minimal supports only on the bottom of the model. See photo.

Gyroid Slip-on Handlebar Cover for ONYX CTY2

Thanks to Jérémy Reeder for original design. Use of the 3MF slicer files is crucial - this model uses only gyroid infill (no solid outer perimeters) for all but a few millimeters of the base. Print in TPU to make a soft comfortable grip.…

Gyroid fidget spinner

This is a modern, tactile fidget toy featuring a nested concentric ring design . 3D-printed in a vibrant mint green / pastel teal PLA plastic, it serves as both an engaging sensory tool and a showcase of precision print-in-place engineering

Gyroid Coaster

Print with 0 top layers to expose the gyroid infill. Print with TPU.

Gyroid Infill Orchid Pot

This is a two-textured pot made up of two intersecting models: a model for the top, bottom and spiral stripes which I printed with side perimeters, and a model for the sweeping sides of the pot, which I printed with gyroid infill but no…

Coaster - Gyroid infill

Otevřený podtácek s gyroidovou výplní. -- Open coaster with gyroid infill.

Gyroid lamp

A small lamp (diam 75mm, height 150mm) exposing the gyroid infill to diffuse shiny light. Print instructions I've used two filaments for the print (out of the 5 on my MMU), the extruder 1 is loaded with Jet black PLA and the extruder 3 is…

Lloid the Gyroid (New Leaf/New Horizons version)

This is an updated version of Lloid to include the construction helmet he wears in New Leaf, Pocket Camp, and New Horizons. I also hollowed out the inside so you could conceivably store something in there. Print Settings Printer Brand:…

Laves graph / Inverse gyroid

The Gyroid partitions the space into two unconnected, infinite subspaces, which is what we can see here printed in two colors. We're effectively looking at the empty space as opposed to what is normally printed as infill (with a generous…

Gyroid Cup

A cup made from a gyroid lattice structure. Use it for holding pens, toothbrushes, candles, or whatever. Designed using nTopology. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm layer…

STOMP! gyroid

Design We love gyroid infill, not only for its properties but also because it is so nice, almost a meditation, to sit and watch it printing (and honestly, haven't you done that?). So why not show this mesmerizing structure and make use of…

Recursive Gyroid

Recursive Gyroid Please be aware that this is a Difficult Print! Model is a mathematical equation and build up with four processors (some errors) It was just a test. Print instructions Difficult Print! Try to print support just supporting…

Gyroid pen holder with knurled screw cap

I designed this pen holder so that all my pens would not mix together, keeping things organized a little better. The cap screws onto the lower part and can be removed if necessary. It was also an excuse to learn how to make knurled…

Lloid (Animal Crossing gyroid) planter

This is a re-mix of a re-mix, based on this: https://www.thingiverse.com/thing:3442346 Note : If you want to use this as an actual planter, PLA prints can be "leaky." I took the precaution of giving the inside of the prints a coating of…

Hex-Gyroid Fidget Toy

The hexagon is one of my favorite geometric shapes for designing, so I created this fidget. It has an eyelet and can also be used as a necklace, as a Christmas tree decoration and - last but not least - also as a calibration test for your…

Gyroid Stress ball 60mm- relieve your stress about Corona / Covid-19 virus

Keep your stress levels down while you stay at home to protect yourself from that Virus. Stay Safe, play with your ball(s). Category: 3D Printing

Gyroid infill light

I find infill patterns to be more and more interesting and beautiful in slicer software over time but unfortunately it's often hidden within the perimeters of a closed 3D printed part. I wanted to use an infill pattern to create a lamp…

Gyroid Head - Eye Glass Holder

Its a human face glass holder made from a lattice structure called "gyroid" . Scaling is unto your requirements ( I prefer 7000% uniform scaling )

iphone 12 gyroid cover and rose lens cover

this is a cover for iphone 12 &12pro with a perfect fit for both phones with a sim card slot ,removable buttons and rose lens cover please not the lens and buttons are printed on 0.25 nozzle for better details .( stl files will be added…

Gyroid Business Card Holder

Uploaded .3mf, .stl and .gcode files. Model is printed without bottom and top layers and without perimeters. Printed with only 6% gyroid infill and 0.15 mm layer height.

Hex Gyroid Coaster

Have fun with infills. You can add a solid shape to PrusaSlicer and alter the parameters to come up with some wild prints. Here is my Gyroid Coaster. If you open the 3mf file in PrusaSlicer, you will not see the gyroid pattern until you…

Dodecahedron Light Shade Gyroid

This is gyroid type of light/lamp shade that forms to a complete dodecahedron shape On assembly, use cable ties or simply use super glue on each wall to connect them together. I suggest cable ties only to ensure future serviceability.…

Gyroid LED Lamp (Parametric)

The lamp is a complete redesign of Evocato 's “ Gyroid Lampshade ” and uses an E27 instead of an E14 lamp base by default. Most parts of the lamp can be cutomized in Fusion 360 using its parameter feature, for example if you have another…

Gyroid Chopstick Holder

The Idea: use a gyroid as a design element no supports, minimal design Design Process: the gyroid got pretty thin in the middle, so I added a solid base for easy printing Overall dimensions: weight height diameter 6 g 12 mm 40 mm Print…

Gyroid Pen Holder

Created in PrusaSlicer with modifier meshes, read this tutorial to learn more: https://blog.prusaprinters.org/model-with-prusaslicer-modifier-meshes-tutorial If you slice this yourself, make sure that the infill anchoring is set to 0.…

Huawei P20 Pro - Gyroid Mesh Case

Huawei P20 Pro Case with Gyroid Mesh backside. Prusaslicer project with Huawei P20 Pro plain case, layer modifier printing just infill mesh for backside. I printed mine with PETG and 0.6mm nozzle. If using 0.4mm nozzle mesh can be mad…

Gyroid infinite amazing pattern

With the base model you can create infinite patterns in 3dSpace by mirroring and arraying it in all directions, i also added 2 examples of ist. feel free to create cool stuff. its dimensions are 50x50x50mm 2mm wallthickness

Gyroid Shelf Bracket (castomisable in Blender)

Very strong shelf holder, I loaded it 20kg. It is easy to put on 6-8mm dowels. The depth of the shelf is 15-20cm. Update 06.10.2020 Remodeling in Blender 2.90. Much less lag in comparison with the old version.Gyroid mesh is now not…

Gyroid Lampshade

This is a via modifier meshes customizable Lampshade for E14 LED lamps. I also included STEP and f3d files so you can easily remix it :) You just need a E14 socket with a cable and a E14 LED lamp, the rest is 3D printed. I printed my…

Silica Dry Box for Bambu Lab AMS - Quick Print with Gyroid Infill

I had huge issues with layer delamination on the original model, I think the frequent z-axis up-and-down led to stepping errors. In addition the printing just takes ages. So I thought, why not use the features of the slicer. The gyroid…

Gyroid model

The files provided here contain 3D models of gyroid structures. These models serve to visualize and explore the fascinating three-dimensional periodic minimal surface that is found in a variety of real-world applications, from nanoporous…

(Remix) Animal Crossing Gyroid Planter With Larger Top Hole

This is a remix of John_Wet's gyroid which is a remix of jcohen313's gyroid which is a remix of westomopresto's groid on thingiverse. I wanted to print this rally big and thought the large trim at the top looked off to me and would also…

Small Gyroid Coaster

Just a cool Coaster made out of a gyroid mesh. This is one of multiple sizes and it is the Small Variant -If you want access to my Member exclusive discord and email list, you can also go and support me on Thangs, with all of the perks of…

Medium Gyroid Coaster

Just a cool Coaster made out of a gyroid mesh. This is one of multiple sizes and it is the Medium Variant -If you want access to my Member exclusive discord and email list, you can also go and support me on Thangs, with all of the perks…

Large Gyroid Coaster

Just a cool Coaster made out of a gyroid mesh. This is one of multiple sizes and it is the Large Variant -If you want access to my Member exclusive discord and email list, you can also go and support me on Thangs, with all of the perks of…

iPhone 13 - Gyroid cover

iPhone 13 - Gyroid cover - Light weight

Gyroid Planter

I made a planter using this. ENDER 3 V2 NEO SonicPad cura PLA Nozzle 0.4 mm Layer height 0.2 No support Gyroid

Colander Bowl or Gyroid Planter

I used Cura Slicer. Cura General settings - Viewport behavior [ ] Automatically drop models to the build plate ↑↑ Uncheck and then open 3mf ↑↑ ------------------------------------------------ Other Models Link:…

Gyroid Paddle Board Deinflation Silencer

Uses gyroid infil to silence the noise of deflating a paddleboard when you let the air out of a paddle board it makes a very loud woosh so there are actually silencers you can use to open the valve more quietly. So i designed my own…

Gyroid Infill Lamp

Gyroid LED Lamp Print instructions Print Body and Cap with just 3 bottom layers and gyroid infill. Glue everything together, except "Body". Base have cut out for simple LED cotroller, like this:…

Less rocking version of "Silica Dry Box for Bambu Lab AMS - Quick Print with Gyroid Infill"

The original model is super cool, but it has one flaw - when you print something fast and the printer shakes vigorously, the silica boxes sometimes hit the spools. To avoid this, I made the back bottom of the box rectangular so it would…

Gyroid capillary pump (GCP)

Karamzadeh, V., Sohrabi-Kashani, A., Shen, M. & Juncker, D. Digital Manufacturing of Functional Ready-to-Use Microfluidic Systems. Advanced Materials 35, 2303867 (2023). https://doi.org/10.1002/adma.202303867

Hollow gyroid cylinder

Karamzadeh, V. et al. High-Resolution Additive Manufacturing of a Biodegradable Elastomer with A Low-Cost LCD 3D Printer. Advanced Healthcare Materials, 2303708 https://doi.org/10.1002/adhm.202303708

Animal Crossing Lloid (gyroid) Planter

I decided to make the original model for my mother for Christmas, however I thought it was lacking a base, so here is the completed model with a base. Notes: Print the base 1% larger than the planter itself, this will help with fitting…