Penguin Lantern for IKEA Tealights – Generative Lattice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 110 mm penguin lantern with a gyroid back and spinodal belly. Fits a standard IKEA tealight (Ø38 mm), one piece.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 1
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
A penguin lantern that glows from the inside. Its back is a gyroid lattice, its belly a softer spinodal pattern, so light comes through in two different textures and throws patterned shadows on the table. Generated algorithmically (signed distance fields + marching cubes), checked watertight and printable.
Made for a standard IKEA tealight (Ø38 mm), which sits in a Ø39.6 mm socket in the base; there is an opening in the head for heat. For a real flame print in PETG or ASA and never leave it unattended – an LED tealight is the safest choice, as PLA softens near heat.
PRINT SETTINGS
Size: 82 × 61 × 110 mm, approx. 32 g
Nozzle 0.4 mm, layer 0.16–0.2 mm, 2–3 walls
Print upright on the base; most printers need no supports (add tree supports under the beak if needed)
White or natural filament glows best. Always follow your filament manufacturer's recommended temperatures first
Part of the Revo3D generative Christmas collection: 10 styles, 50 models from small ornaments to large sculptures. Made by Revo3D, builders of large-format Revon 3D printers – revo3d.pl/en