Nooelec SDR Brace & Cooling Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cooling shroud and brace for Nooelec SDRs. Fits Atolla powered USB hubs (and probably others but YMMV).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Do you ever look at your SDR's, and wish they were just a little cooler? Well they aren't little coolers, they are SDRs. But this shroud, assuming you attach a fan to it, will keep their temps lower, and keep strain off of the connectors on the SDRs and the USB hub.
Verified to fit the Atolla 8-Port Powered USB 3.0 Hub, will probably fit other Atolla hubs, and probably some other brands, but YMMV.
Attach your 40mm fan of choice, (i have no idea what screw size, i just consulted the spare hardware jar), and ensure the fan exhausts out from the top.
Fillers for all open areas are included, so you can ensure optimal flow of air, regardless of how many SDRs you have installed.
Install all filler plates and reverse the fan to enable hovercraft mode.
Print fan side down for optimal results. Supports needed.