Washing Machine Cistern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cistern to contain and recycle surges from the sewer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
This is a tank for several drains, to contain and recycle surges from the sewer. The washing machine and furnace condensate lines drain into the top. The bottom is sized to match a 2" PVC pipe, going into a trap and then into the sewer.
I've been having problems with pressure surges in the sewer pushing water out this drain. The tank has a capacity of about 5 liters; hopefully the water surge will be contained within the tank and then run back down the drain. The top has a grid of holes to let air out; the holes are tapered to reduce the spray if any sewer water hits it.
Includes FreeCAD source, STL file, PrusaSlicer project, and a few images of the model and the final result, installed. Printed with a Prusa Core One+; the final tank was just about as big as the Prusa can handle. Printed in PETG for water resistance; I added a coat of epoxy at the top of the narrow section for strength.