Washing Machine Cistern
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cistern to contain and recycle surges from the sewer.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution
This is a tank for several drains, to contain and recycle surges from the sewer. The washing machine and furnace condensate lines drain into the top. The bottom is sized to match a 2" PVC pipe, going into a trap and then into the sewer.
I've been having problems with pressure surges in the sewer pushing water out this drain. The tank has a capacity of about 5 liters; hopefully the water surge will be contained within the tank and then run back down the drain. The top has a grid of holes to let air out; the holes are tapered to reduce the spray if any sewer water hits it.
Includes FreeCAD source, STL file, PrusaSlicer project, and a few images of the model and the final result, installed. Printed with a Prusa Core One+; the final tank was just about as big as the Prusa can handle. Printed in PETG for water resistance; I added a coat of epoxy at the top of the narrow section for strength.